Electrolux # Panduan Servis - Halaman 30

Jelajahi secara online atau unduh pdf Panduan Servis untuk Kulkas Electrolux #. Electrolux # 49 halaman. Over the range microwave oven
Juga untuk Electrolux #: Panduan Petunjuk Instalasi (8 halaman), Panduan Penggunaan & Perawatan (20 halaman), Panduan Penggunaan & Perawatan (36 halaman), Panduan Penggunaan & Perawatan (24 halaman), Panduan Penggunaan & Perawatan (38 halaman), Buku Resep (17 halaman), Buklet Instruksi (12 halaman), Panduan Penggunaan & Perawatan (20 halaman), Buku Instruksi (16 halaman), Buku Instruksi (12 halaman), Panduan Pengenalan (16 halaman), Panduan Pengguna (11 halaman), Panduan Penggunaan & Perawatan (26 halaman), Panduan Penggunaan & Perawatan (38 halaman), Panduan Pemilik (9 halaman), Panduan Penggunaan dan Perawatan (16 halaman), Panduan Penggunaan dan Perawatan (16 halaman), Panduan Petunjuk Instalasi (21 halaman), Panduan Pemilik (16 halaman), Panduan Penggunaan dan Perawatan (16 halaman)

Electrolux # Panduan Servis
GLMV169GSB
GLMV169GBB
GLMV169GQB
PLMVZ169GCB/C
Pin No.
Signal
I/O
34
P26
OUT
35
P25
OUT
36
P24
OUT
37
P23
OUT
38
P22
OUT
39
P2
OUT
40
P20
OUT
4
P7
OUT
42
P6
OUT
43
P5
OUT
44
P4
OUT
45-47
P3-P
OUT
48-50
OUT
SEG24-SEG22
5-72
OUT
SEG2-SEG0
73/74
VCC/VREF
75
AVSS
76
COM3
OUT
77
COM2
OUT
78
COM
OUT
79
COM0
OUT
80
VL3
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G7 line keys on key matrix is touched.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G6 line keys on key matrix is touched.
Terminal not used.
Terminal not used.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G3 line keys on key matrix is touched.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G2 line keys on key matrix is touched.
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P43-P46 terminal while one
of G line keys on key matrix is touched.
Terminal not used.
Hood lamp driving signal.
To turn on and off relay(RY5). " L " level: During
Hood lamp ON. "H" level: During Hood lamp
OFF.
Terminal not used.
Hood motor driving signal.
To turn on and off relay(RY4). "L" level: During
Hood motor ON. "H" level: During Hood motor
OFF.
Terminal not used.
Terminal not used.
Segment data signal.
Connected to LCD.
The relation between signals are as follows:
LSI signal (Pin No.)
SEG 2 (5) -------------------- SEG2 ( )
SEG 20 (52) -------------------- SEG20 ( 2)
SEG 9 (53) -------------------- SEG9 ( 3)
SEG 8 (54) -------------------- SEG8 ( 4)
SEG 7 (55) -------------------- SEG7 ( 5)
SEG 6 (56) -------------------- SEG6 ( 6)
SEG 5 (57) -------------------- SEG5 ( 7)
SEG 4 (58) -------------------- SEG4 ( 8)
SEG 3 (59) -------------------- SEG3 ( 9)
SEG 2 (60) --------------------SEG2 (0)
SEG (6) --------------------SEG ()
IN
Connected to GND.
IN
Connected to VC.
Terminal not used.
Common data signal: COM2.
Connected to LCD signal COM2.
Common data signal: COM1.
Connected to LCD signal COM.
Common data signal: COM0.
Connected to LCD signal COM0.
IN
Power source voltage input terminal.
Standard voltage for LCD.
Description
LCD (Pin No.)
LSI signal (Pin No.)
SEG 0 (62) --------------------- SEG0 (2)
SEG 9 (63) ---------------------- SEG 9 (3)
SEG 8 (64) ---------------------- SEG 8 (4)
SEG 7 (65) ---------------------- SEG 7 (5)
SEG 6 (66) ---------------------- SEG 6 (6)
SEG 5 (67) ---------------------- SEG 5 (7)
SEG 4 (68) ---------------------- SEG 4 (8)
SEG 3 (69) ---------------------- SEG 3 (9)
SEG 2 (70) ---------------------- SEG 2 (20)
SEG (7) ---------------------- SEG (2)
SEG 0 (72) ---------------------- SEG 0 (22)
30
H : GND
OFF
L
ON
H : GND
OFF
ON
L
LCD (Pin No.)