Electrolux AEG SANTO S70177TK Panduan Petunjuk Pengoperasian - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kulkas Electrolux AEG SANTO S70177TK. Electrolux AEG SANTO S70177TK 24 halaman.

Halaman Cetak

Technical Terminology

Refrigerant

Liquids that can be used to generate a cooling effect are known as

refrigerants. They have a relatively low boiling-point, indeed so low, that

the warmth from the food stored in the fridge or freezer can cause the

refrigerant to boil and vaporise.

Refrigerant Circuit

Closed circulation system that contains the refrigerant. The refrigerant

circuit comprises primarily of an evaporator, a compressor, a condenser

and pipe work.

Evaporator

The refrigerant is evaporated in the evaporator. Similar to all other liquids,

refrigerant requires heat to evaporate. This heat is removed from the

interior of the appliance, as a result the interior is cooled. The evaporator

is therefore located inside the appliance or placed in foam immediately

behind the inner wall and thus not visible.

Compressor

The compressor looks like a small drum. It is driven by a built-in electric

motor and is mounted on the base of the appliance at the rear. The task

of the compressor is to draw in vaporised refrigerant from the evaporator,

to compress it, and to pass it on to the condenser.

Condenser

The condenser normally has the form of a grid. The refrigerant com-

pressed in the compressor is liquefied in the condenser. During this

process, heat is released to the surrounding air at the surface of the

condenser. The condenser is mounted on the base of the appliance.