Electrolux AR Series Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kulkas Electrolux AR Series. Electrolux AR Series 18 halaman. Refrigeration
Juga untuk Electrolux AR Series: Panduan Pengguna (18 halaman)

Halaman Cetak

Spillsafe™ glass shelves

Spillsafe™ glass shelves keep spills on the shelf. A shelf

retaining system minimises accidental movement of shelves

and they can be adjusted to various heights. Spillsafe™

glass shelves are not to be used as slide out shelves. To

remove the shelves, gently pull them forward until the shelf

comes clear of the shelf guides. To return the shelf, make

sure there is nothing behind that may obstruct movement.

Gently push the shelf into the cabinet and back into position.

Slide away glass shelf (where fitted)

This shelf can be used either as a full depth shelf or when

tall items need to be stored at the front of the appliance it

can be collapsed to half its original depth.

• To collapse the shelf:

Pull the front half of the shelf forward.

Then, from the underside, lift the front half of the

shelf by raising the rear edge over the recessed

hook detail.

Hook detail

Pull the shelf forward and allow the rear to drop into

the side channels.

Push the front shelf backwards (3,4) until it reaches

the rear stops.

• Repositioning:

The shelf can be repositioned within the appliance unit

by pulling the whole assembly out until the side panels

are free to pivot down, then pivoting the rear of the shelf

until the shelf is free from the liner runners. The shelf can

then be positioned in any of the runners – this is a very

useful feature if your appliance door happens to have

limited access.

electrolux refrigeration using your appliance 8

Deodoriser (where fitted)

Your appliance is fitted with a catalysing deodoriser to assist

with the removal of food odours inside your appliance.

Odours are removed by adsorption through the filter by the

normal operation of the appliance. Keeping food covered

and wrapping food with plastic wrap will also help to reduce

the odours inside your appliance.

Bottle twist holder operation (where fitted)

The bottle twist holder is used to prevent bottles from falling

over. The bottle twist holder consists of two parts, a sliding

front, and a rotating retainer ring.

The bottle twist holder can be used in two positions:

• Horizontal

When the bottle twist holder ring is horizontal, any item

that fits within the ring can simply be placed inside it.

• Vertical

When the bottle twist holder ring is vertical, it is possible

to simply slide the bottle twist holder along the bottle

retainer bar until it is pushed up against a bottle.

Note:

The bottle should be constrained on the other side by either

the end of the bin or other adjacent bottles.