Electrolux Built-In Dishwasher Panduan Petunjuk Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Kulkas Electrolux Built-In Dishwasher. Electrolux Built-In Dishwasher 28 halaman. Built-in oven
Juga untuk Electrolux Built-In Dishwasher: Panduan Penggunaan dan Perawatan (36 halaman), Panduan Penggunaan & Perawatan (44 halaman), Panduan Penggunaan & Perawatan (28 halaman), Panduan Penggunaan & Perawatan (40 halaman), Panduan Penggunaan & Perawatan (27 halaman), Panduan Penggunaan & Perawatan (12 halaman), Panduan Penggunaan & Perawatan (22 halaman), Tips dan Resep (36 halaman), Panduan Petunjuk Pengoperasian (18 halaman), Panduan Pengguna Ower (21 halaman), Panduan Pengguna Ower (13 halaman), Panduan Pemilik (29 halaman), Panduan Pengguna (27 halaman), Buku Instruksi (17 halaman), Buku Instruksi (15 halaman), Buku Petunjuk (18 halaman), Buku Instruksi (27 halaman), Buku Instruksi (18 halaman), Panduan Servis (50 halaman)

Halaman Cetak
Electrolux Built-In Dishwasher Panduan Petunjuk Instalasi
6
Preparing for Installation

INSTALLATION TIPS

Please read all safety instructions before installing your new Electrolux
dishwasher.
WARNING
Electric Shock Hazard – Disconnect electrical power at the fuse box or circuit breaker box before
beginning installation. Failure to follow this warning could result in death or serious injury.
•
Examine the dishwasher and locate the connections. See Locating the
Connections, page 9.
•
Locate the dishwasher where there is easy access to drain, water, and
electrical lines. The best location is on either side of the kitchen sink for
access to existing plumbing and ease in loading dishes. See Making the
Connections, pages 9-11.
•
Electrical, water and drain connections are not the same for all age,
brands or models of dishwasher. Check the location and length of home
utilities. See Making the Connections, pages 9-11.
•
A 15-20 amp, grounded 120 volt AC only electrical supply is required. See
Making the Connections, pages 9-11.
•
If the dishwasher drain hose will be connected to a food disposer for the
first time, remove knock out plug covering disposer inlet. See Making the
Connections, pages 9-11.
•
Kinked water and drain hoses can cause problems. See Finishing the
Connections, page 16.
•
Dishwasher need to be connected to a hot water supply with enough water
pressure to ensure an adequate fill. See Making the Water Connection,
page 10.
•
Each home installation differs. You will need additional parts listed above
to complete the installation. See Materials Needed for Installation, page 5.
•
Flush water line prior to making the final connection to prevent clogging of
the inlet valve filter screen. See Finishing the Water Connection, page 16.
•
The dishwasher will look, sound and perform best when properly leveled.
See Leveling the Dishwasher, page 15.
•
Anchor the dishwasher to the countertop and adjacent cabinets. See
Securing the Dishwasher, page 19.