Bosch ASCENTA SHX5AL Panduan Penggunaan dan Perawatan - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Mesin pencuci piring Bosch ASCENTA SHX5AL. Bosch ASCENTA SHX5AL 21 halaman. Bosch ascenta models dishwashers use & care manual
Juga untuk Bosch ASCENTA SHX5AL: Panduan Penggunaan dan Perawatan (21 halaman), Panduan Penggunaan & Perawatan (26 halaman)

Bosch ASCENTA SHX5AL Panduan Penggunaan dan Perawatan
2. Return thelocking n uttoitsinstalled position a nd turnit 1/8 turnclockwise.
3. Return thetoprack tothetoprack roller g uides.
Toremove t hebottom spray arm:
1. Remove theempty bottom rack from thedishwasher
tub.
2. Grasp a ndliftthebottom spray a rmasshown i nFigure 1 9.
3. Look f orobstruction inthespray n ozzles.
4. If thespray n ozzles need cleaning, flush them under running w ater.
Toreinstall thebottom spray a rm:
1. Return t hebottom spray a rmto itsinstalled p osition a ndpress i t sothatit snaps i nto
place.
2. Return thebottom rack toitsinstalled position.
Check/Clean the Filter System
This dishwasher has a filter system that consists of a Large Object Trap/Cylinder Filter assembly
and a Fine Filter, Select models have an additional Micro Filter, The filter system is located on the
inside of your dishwasher under the lower rack and is easily accessible,
During normal use, the filter system is self-cleaning. You should occasionally inspect it for foreign
objects and clean it when necessary.
,CAUTION
To avoid
injury,
do not reach
into the large
object
trap
with
your
fingers.
The large
object
trap
could
contain
sharp
objects.
To Remove
the Large
Object
Trap/Cylinder
Filter
Assembly:
1. Remove the bottom
rack.
2. Grasp the assembly as shown in Figure 20 and turn it counter clockwise 1/4 turn.
3. Lift out the assembly as shown in Figure 21 and 22.
4. Carefully examine the assembly. If you find debris in the Large Object Trap, turn it upside-down
and gently tap it on a surface such as a countertop to dislodge and remove the debris. Flush
the Cylinder Filter clean by holding it under running water. Place parts back in unit and lock
as shown in Figure 23.
Figure
20
To open - turn counterclockwise.
Figure
21
Large Object
Trap
Figure
22
Figure
23
To close - turn clockwise.
15