Bosch DISHWASHER Panduan Petunjuk Instalasi - Halaman 12

(355mm)

Figure 18

Figure 19

Figure 20

Placing the Dishwasher/ Securing the Dishwasher

14"

21"

(533mm)

Figure 21

PLACING THE DISHWASHER

1) Straighten and position the hot water supply line and the

electrical supply cable as shown in Figure 18 so that they

will align with their channels under the dishwasher base.

2) Position the dishwasher close enough to the enclosure

so that you can run the dishwasher drain hose to the under

sink drain connection. Make certain that the hot water

supply line and the electrical supply cable are in their

channels under the dishwasher base, as shown in Figure

19, letter A.

3) Place the dishwasher directly in front of the enclosure.

4) Perform a level check as shown in Figure 19. Adjust the

rear leveler by turning the center screw at the front of the

dishwasher, as shown in Figure 20, letter B. Turning the

screw clockwise raises the rear of the dishwasher. Adjust

the front levelers by turning them with a screwdriver, as

shown in Figure 20, letter C. Turning the levelers to the

right raises the dishwasher. If additional height is needed,

shims may be added under the leveler feet.

5) Push the dishwasher into the enclosure.

Drive the mounting screws through the holes in the

mounting brackets, as shown in Figure 21, letter A for Top

Mount, or as shown in Figure 21, letter B for Side mount.