Bosch SB Series Panduan Petunjuk Pengoperasian - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Mesin pencuci piring Bosch SB Series. Bosch SB Series 44 halaman. Dishwasher bosch
Juga untuk Bosch SB Series: Panduan Petunjuk Pengoperasian (38 halaman), Panduan Petunjuk Pengoperasian (38 halaman), Panduan Petunjuk Pengoperasian (42 halaman), Petunjuk Pengoperasian (36 halaman), Buku Petunjuk (38 halaman), Buku Petunjuk (48 halaman), Buku Petunjuk (40 halaman), Buku Petunjuk (44 halaman), Buku Petunjuk (50 halaman), Buku Petunjuk (44 halaman), Buku Petunjuk (40 halaman), Buku Petunjuk (42 halaman), Buku Petunjuk (42 halaman), Buku Petunjuk (44 halaman), Buku Petunjuk (40 halaman), Buku Petunjuk (46 halaman), Buku Petunjuk (40 halaman), Buku Petunjuk (46 halaman), Buku Petunjuk (50 halaman), Buku Petunjuk (50 halaman), Buku Petunjuk (48 halaman), Panduan Petunjuk Pengoperasian (42 halaman), Buku Petunjuk (40 halaman), Buku Petunjuk (44 halaman), Panduan Petunjuk Pengoperasian (42 halaman), Panduan Petunjuk Pengoperasian (40 halaman), Buku Petunjuk (40 halaman), Buku Petunjuk (40 halaman), Buku Petunjuk (42 halaman), Buku Petunjuk (42 halaman), Panduan Petunjuk Pengoperasian (44 halaman), Panduan Petunjuk Pengoperasian (42 halaman), Panduan Petunjuk Pengoperasian (42 halaman), Buku Petunjuk (50 halaman), Buku Petunjuk (42 halaman), Buku Petunjuk (42 halaman), Buku Petunjuk (48 halaman), Buku Petunjuk (42 halaman), Buku Petunjuk (42 halaman), Buku Petunjuk (42 halaman), Panduan Petunjuk Pengoperasian (42 halaman), Buku Petunjuk (50 halaman), Buku Petunjuk (40 halaman), Buku Petunjuk (42 halaman), Buku Petunjuk (42 halaman), Buku Petunjuk (48 halaman), Buku Petunjuk (42 halaman), Buku Petunjuk (40 halaman)

Halaman Cetak
Bosch SB Series Panduan Petunjuk Pengoperasian

Fault table

Fault
"Check water supply"
display @ lights up.
Error code :
is lit.
Error code :
is lit.
Error code :
is lit.
Error code :
is lit.
Cause
Supply hose kinked.
Tap turned off.
Tap jammed or calcified.
Filter in the water supply blocked. Switch off the appliance and pull out the
Filters 1j are soiled or
blocked.
Waste-water hose kinked or
blocked?
Siphon connection still sealed.
Cover on the waste water pump
loose.
Waste water pump blocked or
cover on the waste water pump is
not locked in position.
Mains voltage too low.
Fault, what to do?
Remedial action
Install supply hose without kinks.
Turn on tap.
Turn on tap.
Flow rate must be min. 10 l/min. when
water supply is open.
mains plug. Turn off the tap. Unscrew water
connection.
Clean filter in the supply hose. Screw water
connection on again. Check for leaks.
Reconnect power supply. Switch on the
appliance.
Clean filters.
(see Cleaning and maintenance).
Install hose without kinks, remove any
residue.
Check connection to siphon and open if
required.
Lock cover correctly.
(See Waste water pump)
Clean pump and lock cover correctly. (See
Waste water pump)
Not an appliance fault, have the mains
voltage and electrical installation checked.
en
29