AirStage ABUA24RLAV Panduan Instalasi - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pendingin Udara AirStage ABUA24RLAV. AirStage ABUA24RLAV 17 halaman. Indoor unit (floor / ceiling type)
Juga untuk AirStage ABUA24RLAV: Panduan Pengoperasian (8 halaman)
Halaman Cetak] 1
6.4. Connection of wiring
(1) Remove the electric component box.
Electric component box
Do not remove the RFM fi xing screws. If the stays are removed, the electric component
box will fall.
If you use as "Floor console", you must remove screws and RFMs (2 position).
When removing the electric component box, remove the clamp from the cables.
After completing the work, fasten the cables as they were originally by installing the clamp.
Remove the clamp.
(2) Pull out the electric component box.
(3) Remove the electric component box cover.
Remove the 3 tapping screws.
Base
Be careful not to pinch the lead cables between the electric component box and
base.
Electric component box
RFM
CAUTION
Clamp
Cables
Install the clamp.
Electric component box
Electric component box cover
CAUTION
(4) Wiring
* When there is 1 transmission cable or remote controller cable, fasten it the same way
as shown in the fi gure with a binder (medium).
For U.S.A. and Canada
Remote controller cable
Y1: Red, Y2: White, Y3: Black
GND
Lock nut
For Others
] 1
6.5. External input and external output (Optional parts)
Controller PCB
Input No Voltage terminal (CN17)
Input Voltage terminal (CN6)
Output terminal (CN16)
X1, X2: Transmission cable
Binder (Medium)
(Accessories)
Conduit
(L1, L2 (N): Power supply cable)
Remote controller cable
Y1: Red, Y2: White, Y3: Black
X1, X2: Transmission cable
Binder (Medium)
(Accessories)
Grommet
edging
(Accessories)
GND
L1, L2 (N): Power supply cable
En-10