Dragonfly DF-TB-XXX-ALR Series Panduan Instalasi - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Layar Proyeksi Dragonfly DF-TB-XXX-ALR Series. Dragonfly DF-TB-XXX-ALR Series 4 halaman. Ambient light reflecting thin-bezel fixed projection screens
Halaman CetakFixed Projection Screen Manual
Step 7. Attach and Install the Mounting
Brackets
A. Screw the retaining plates into the sliding nuts.
B. Loosely secure the two mounting brackets to the sliding
nuts in the top frame using the M5 x6mm screws. The
brackets should just be able to slide left and right.
C. Loosely secure the circular metal half of the magnets to
the lower frame, do not tighten the screws completely,
the brackets should just be able to slide left and right.
Step 8. Hang the Screen
A. Measure the overall Length and height of the screen
frame.
B. For Drywall: Drill 4 holes in the wall at the desired height.
The distance of the horizontal holes should be about
2/3 the width of the frame, and the vertical distance of
the holes should be the height of the frame minus 4⅛"
(105 mm).
⅔A
B-105
C. For Concrete: Drive the concrete anchors into the holes drilled in Step B. Drive 2
concrete anchors leaving 5mm to hang the screen. Install the lower 2 magnet pieces using 2 M5x40mm
screws. Hang the screen on the upper brackets and attach the lower part of the frame to the wall with the
magnets.
Care and Cleaning
Clean the screen with a soft microfiber cloth only. DO NOT use soap,
water, harsh detergents, chemicals, distilled spirits or petroleum-
based chemicals to clean the screen. Doing so may result in severe
damage to the screen or the frame coating.
Use a household vacuum cleaner with a brush or furniture cleaning
attachment to clean the felt frame material. Avoid using excessive
amounts of water on the felt.
Dimensions (in Inches)
A
B
C
D
92"
45.1
80.2
45.7
100"
49
87.2
49.6
110"
53.9
95.9
54.5
120"
57.8
102.8
58.4
Technical Support
p.866.838.5052
© 2018 Dragonfly
E
F
G
80.7
1.5
1.1
87.7
1.5
1.1
96.4
1.5
1.1
103.4
1.5
1.1
A
B
5mm
4
C
Upper
Lower
into the
M5x40mm Screws
180822-0935