Dragonfly DFRM-NTT-130-MW Panduan Instalasi - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Layar Proyeksi Dragonfly DFRM-NTT-130-MW. Dragonfly DFRM-NTT-130-MW 17 halaman. Recessed in-ceiling motorized projection screen
Halaman Cetak
DFRM Installation Manual
Step 6. Connect Power Wiring
Warning! To avoid serious injury or death, power off electricity to the branch power
circuit at the breaker before connecting the screen wiring. High voltage electricity
can damage the screen and cause permanent injury or death!
Important! The electrical wiring should be installed in accordance with local and
national electrical codes. Only a licensed electrician should complete the work. All
work should be approved by a licensed inspector.
1. Position and mount the attached power junction box. Do not kink the flexible conduit during
installation.
2. Open the junction box and connect the branch wiring circuit conductors using approved wire
nuts or connectors.
Pg. 8
Color
Black
White
Green
Power Requirement
Purpose
To 120V AC Line
Neutral
Ground
120V AC/.97A.
© 2016 Dragonfly