Electrolux WTM3000 Panduan Instalasi - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kulkas Electrolux WTM3000. Electrolux WTM3000 16 halaman. Ik007 integration kit refrigeration
Juga untuk Electrolux WTM3000: Panduan Instalasi (16 halaman)
Halaman Cetak
- 1. Table of Contents
- 2. Before You Call
- 3. General Warnings
- 4. Refrigerator Integration Kit Items
- 5. Cupboard Dimensions
- 6. Installation of 120˚ Hinge
- 7. Preparation
- 8. Attaching Top Hinge Bracket
- 9. Attaching Slide-Housing to Refrigerator Doors
- 10. Placing Refrigerator in Cupboard
- 11. Refrigerator Alignment
- 12. Attaching Slide-Bar to Cupboard Door
NOTE: For single door models, the door handle must be
completely removed to provide clearance to the cupboard
door and the resulting handle mounting holes hidden with
a cover. Installer must use a tape or plastic cover that suits the
installation appearance (not supplied).
3. While the slide-housing is taped in position, punch a
small hole in the refrigerator door skin corresponding
to the four (4) holes in the housing (Figure 5).
4. The holes should be punched, not drilled, to ensure
the maximum thread can be formed in the metal.
5. Screw four (4) refrigerator screws into the holes
securing the housing in place. The refrigerator screws
are supplied in kit (Figure 6).
If you have a two door refrigerator, repeat this process for
the other door.
Figure 5
1
2
3
4
Figure 6
1
2
3
4
11