DRAKE DSE 2 PLUS Buku Petunjuk - Halaman 10
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Konverter Media DRAKE DSE 2 PLUS. DRAKE DSE 2 PLUS 20 halaman. Dual hd digital signage encoder
Juga untuk DRAKE DSE 2 PLUS: Buku Petunjuk (20 halaman)
Halaman Cetak
First, connect the appropriate input and output video cables and plug in the DSE 2 PLUS power cable.
ETHERNET ACCESS:
Local or remote communication with the unit is only possible through a GUI-based menu via any standard web browser
(Chrome or Firefox recommended). Before you can communicate with the unit you must configure your computers Local
Area Network connection to confirm with the DSE 2 Plus default IP of 172.16.80.1. To do so, follow these steps:
Connect an Ethernet cable from your computer to the Ethernet connection on the rear panel of the DSE 2 Plus.
1. The following steps explain how to do this for a computer with windows XP operating software:
a) On your computer, open the "Control Panel"
b) Double-click on "Network Connections"
c) Right-click on the "Local Area Connection", and then click on the "properties".
d) A dialog box entitled "Local Area Connection Properties" will appear. In this box, double-click on the "Internet
Protocol (TCP/IP)".
e) A dialog box entitled "Internet Protocol (TCP/IP) Properties" will appear. Select the "Use the following IP address"
option and enter the following addresses:
IP address: 172.16.80.2
Subnet mask: 255.255.255.0
No need to enter a value for the Default Gateway.
Click OK to close the dialog box. Now your computer is ready to communicate with the unit.
2. The following steps explain how to do this for a computer with windows 7 operating software:
a) On your computer, open the "Control Panel"
b) Click on "Network and Internet"
c) Click on the "View network status and tasks"
d) Click on "Change Adapter Settings" on left hand side of the window
e) Right-click on the "Local Area Connection", and then click on the "Properties".
f) A dialog box entitled "Local Area Connection Properties" will appear. In this box, double-click on the "Internet
Protocol Version 4 (TCP/IPv4)".
g) A dialog box entitled "Internet Protocol Version 4 (TCP/IPv4) Properties" will appear. Select the "Use the following
IP address" option and enter the following addresses:
IP address: 172.16.80.2
Subnet mask: 255.255.255.0
No need to enter a value for the Default Gateway.
Click OK.
Open a web browser on your computer (Internet Explorer 7 or higher is recommended) and enter the following URL
address (http://172.16.80.1). Once the DSE 2 Plus web server has been loaded from your browser, you should see the
login dialog (see Figure 1). Enter the username and password and click LOG IN. The default username is "admin" (in
lower case letters) and the default password is "pass" (in lower case letters).
10
937.746.4556 |
Login Screen
www.rldrake.com