DRAKE ND-24-IP Panduan Cepat

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Konverter Media DRAKE ND-24-IP. DRAKE ND-24-IP 4 halaman.

ND-24-IP QUICK GUIDE

DESCRIPTION

The ND-24-IP is a low cost professional MPEG-2 and H.264 decoder that is capable of receiving content from

off-air, clear QAM, and IP sources. The ND-24-IP is capable of simultaneously outputting video content in

SDI, HDMI and component formats. SDI outputs are available in 3G-SDI, HD-SDI, or SD-SDI formats.

The unit can be used as a stand-alone high quality decoder, or used in conjunction with other IP encoders,

to provide an end-to-end IP video delivery solution over a managed network.

When the ND-24-IP decoder is used with Drake's PEG encoder (with Zixi option) and a Zixi Link License, it can

provide a point-to-point reliable IP video transport from anywhere in the world with an internet connection.

The ND-24-IP can also be used in a point-to-multipoint application, where the ND-24-IP would decode the IP

based Zixi protocol stream from a Zixi Broadcaster.

STEP 1: Login

Access and programming of the ND-24-IP is through the rear panel remote control ethernet port. There are

two options for the ethernet control interface setup: DHCP enabled or DHCP disabled. If you are connected

from a LAN router then enable DHCP.

The router will automatically assign a local IP address that will be displayed on the front panel. If you are

connecting directly to a computer the default IP address is 172.16.80.1. Make sure you have your computer's

ethernet adapter within the same subnet when using the default IP address.

www.rldrake.com

Document#651242800B / Item#1002643