DRAKE PEG PLUS Panduan Pengaturan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Konverter Media DRAKE PEG PLUS. DRAKE PEG PLUS 8 halaman. Public educational & governmental access encoder

Halaman Cetak

We recommend that you write the following information in the spaces provided below.

Purchase Location Name

Purchase Location Telephone Number

PEG-PLUS Serial Number

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Reverse engineering or disassembly is prohibited.

Basic Start Up - Login Screen

First, connect the appropriate input and output video cables and plug in the PEG-PLUS power cable.

ETHERNET ACCESS:

Local or remote communication with the unit is only possible through a GUI-based menu via Chrome or Firefox web

browser. Before you can communicate with the unit you must configure your computers Local Area Network connection to

confirm with the PEG-PLUS default IP of 172.16.70.1. To do so, follow these steps:

Connect an Ethernet cable from your computer to the Control 10/100 port of the PEG-PLUS.

1. The following steps explain how to do this for a computer with Windows XP operating software:

a) On your computer, open the "Control Panel"

b) Double-click on "Network Connections"

c) Right-click on the "Local Area Connection", and then click on the "properties".

d) A dialog box entitled "Local Area Connection Properties" will appear. In this box, double-click on the "Internet

Protocol (TCP/IP)".

e) A dialog box entitled "Internet Protocol (TCP/IP) Properties" will appear. Select the "Use the following IP address"

option and enter the following addresses:

IP address: 172.16.70.2

Subnet mask: 255.255.255.0

No need to enter a value for the Default Gateway.

Click OK to close the dialog box. Now your computer is ready to communicate with the unit.

2. The following steps explain how to do this for a computer with Windows 7 operating software:

a) On your computer, open the "Control Panel"

b) Click on "Network and Internet"

c) Click on the "View network status and tasks"

d) Click on "Change Adapter Settings" on left hand side of the window

e) Right-click on the "Local Area Connection", and then click on the "Properties".

f) A dialog box entitled "Local Area Connection Properties" will appear. In this box, double-click on the "Internet

Protocol Version 4 (TCP/IPv4)".

g) A dialog box entitled "Internet Protocol Version 4 (TCP/IPv4) Properties" will appear. Select the "Use the following

IP address" option and enter the following addresses:

IP address: 172.16.70.2

Subnet mask: 255.255.255.0

No need to enter a value for the Default Gateway.

Click OK.

Open a Chrome or Firefox web browser on your computer and enter the following URL address (http://172.16.70.1). Once

the PEG PLUS web server has been loaded from your browser, you should see the login dialog. Enter the username and

password and click LOG IN. The default username is "admin" (in lower case letters) and the default password is "pass"

(in lower case letters).

937.746.4556 |