DRAKE 806DM Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Modulator DRAKE 806DM. DRAKE 806DM 8 halaman. Agile ntsc demodulator

Halaman Cetak

Caution Statements

WARNING: TO PREVENT FIRE OR

ELECTRICAL SHOCK DO NOT

EXPOSE TO RAIN OR MOISTURE

¡WARNING!

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE POWER SUPPLY COVERS

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

An appliance and cart combination should be moved with care. Quick stops,

excessive force and uneven surfaces may cause the appliance and cart combina-

tion to overturn.

The lightning flash with arrow head symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

Important Safety Instructions

1. Read Instructions—All the safety and operating instructions should be read before the

product is operated.

2. Retain Instructions—The safety and operating instructions should be retained for

future reference.

3. Heed Warnings—All warnings on the product and in the operating instructions should

be adhered to.

4. Follow Instructions—All operating and use instructions should be followed.

5. Cleaning—Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleansers. Use a damp cloth for cleaning.

6. Attachments—Do not use attachments that are not recommended by the product

manufacturer as they may cause hazards.

7. Water and Moisture—Do not use this product near water—for example, near a bathtub,

wash bowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool; and

the like.

8. Accessories—Do not place this product on an unstable cart, stand, tripod, bracket, or

table. The product may fall, causing serious injury to a child or adult, and serious damage

to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the

manufacturer, or sold with the product. Any mounting of the product should follow the

manufacturer's instructions, and should use a mounting accessory recommended by the

manufacturer.

9. A product and cart combination should be moved with care. Quick stops, excessive force,

and uneven surfaces may cause the product and cart combination to overturn.

10. Ventilation—Slots and openings in the cabinet are provided for ventilation and to

ensure reliable operation of the product and to protect it from overheating, and these

openings must not be blocked or covered. The openings should never be blocked by

placing the product on a bed, sofa, rug, or similar surface. This product should not be placed

in a built-in installation such as bookcase or rack unless proper ventilation is provided or

the manufacturer's instructions have been adhered to.

11. Power Sources—This product should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of power supplied to your

home, consult your product dealer or local power company. For products intended to

operate from battery power, or other sources, refer to the operating instructions.

12. Grounding or Polarization—This product may be equipped with a

alternating-current line plug (a plug having one blade wider than the other). This plug will

fit into the power outlet only one way. This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized

plug.

Alternate Warnings—If this product is equipped with a three-wire grounding-type plug, a

plug having a third (grounding) pin, the plug will only fit into a grounding-type power outlet.

This is a safety feature. If you are unable to insert the plug into the outlet, contact your

electrician to replace your obsolete outlet. Do not defeat the safety purpose of the

grounding-type plug.

12 a. Mise à la terre ou Polarisation—Cet appareil est équipé avec un cordon d'alimentation

à trois fils. Il est a brancher sur une prise ayant un connecteur a la terre. Assurez-vous que

la connection a la terre ne manque pas.

13. Power-Cord Protection—Power-supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the point where they exit from the

product.

14. Outdoor Antenna Grounding—If an outside antenna or cable system is connected

to the product, be sure the antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges. Article 810 of the National

Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of

the mast and supporting structure, grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding electrode. See Figure A.

15. Lightning—For added protection for this product during a lightning storm, or when it

is left unattended and unused for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent damage to the product due to

lightning and power-line surges.

16. Power Lines—An outside antenna system should not be located in the vicinity of

overhead power lines, other electric light or power circuits, where it can fall into such power

lines or circuits.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE. DO NOT OPEN THE CABINET, REFER SERVIC-

ING TO QUALIFIED PERSONNEL ONLY.

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN

CAUTION:

EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE

FULLY INSERTED TO PREVENT BLADE EXPOSURE.

POUR PREVENIR LES CHOCS ELECTRIQUES, NE PAS UTILISER CETTE FICHE

ATTENTION:

POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE AUTRE

SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS

EN LAISSER AUCUNE PARTIE A DECOUVERT.

17. Overloading—Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

18. Object and Liquid Entry—Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on the product.

19. Servicing—Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

20. Damage Requiring Service—Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged,

b. If liquid has been spilled, or objects have fallen into the product,

c. If the product has been exposed to rain or water,

d. If the product does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions as an improper

adjustment of other controls may result in damage and will often require extensive work

by a qualified technician to restore the product to its normal operation,

e. If the product has been dropped or damaged in any way, and

f. When the product exhibits a distinct change in performance—this indicates a need for

service.

21. Replacement Parts—When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the same

characteristics as the original part. Unauthorized substitutes may result in fire, electric

shock or other hazards.

22. Safety Check—Upon completion of any service or repairs to this product, ask the

service technician to perform safety checks to determine that the product is in proper

operating condition.

23. Wall or Ceiling Mounting—The product should be mounted to a wall or ceiling only

as recommended by the manufacturer.

24. Heat—The product should be situated away from heat sources such as radiators, heat

registers, stoves, or other products (including amplifiers) that produce heat.

polarized

NOTE TO CATV SYSTEM INSTALLERS:

THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTEN-

TION TO ARTICLE 820 - 40 OF THE NEC THAT PROVIDES GUIDELINES FOR PROPER

GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL

BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO

THE POINT OF CABLE ENTRY AS PRACTICAL.

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

EXAMPLE OF ANTENNA GROUNDING

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE

SYSTEM (NEC ART 250, PART H)

ANTENNA

LEAD IN

WIRE