Bosch 2 Panduan Pengguna dan Petunjuk Instalasi - Halaman 33

Jelajahi secara online atau unduh pdf Panduan Pengguna dan Petunjuk Instalasi untuk Mesin cuci Bosch 2. Bosch 2 35 halaman. Mini blender
Juga untuk Bosch 2: Panduan Instalasi Cepat (16 halaman), Panduan untuk Instalasi dan Penggunaan (18 halaman), Manual Petunjuk Asli (13 halaman), Manual Petunjuk Asli (22 halaman), Buku Petunjuk (32 halaman), Panduan Pengguna (28 halaman), Panduan Pengguna dan Petunjuk Instalasi (16 halaman), Buku Petunjuk (42 halaman), Panduan Petunjuk Pengoperasian (8 halaman), Buku Petunjuk (8 halaman), Buku Petunjuk (12 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (9 halaman), Buku Petunjuk dan Petunjuk Instalasi (36 halaman), Panduan Pengguna dan Petunjuk Instalasi (48 halaman), Panduan Petunjuk Pengoperasian (26 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna dan Petunjuk Instalasi (24 halaman), Buku Petunjuk (42 halaman), Informasi Untuk Penggunaan (28 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (24 halaman)

Halaman Cetak

Bosch 2 Panduan Pengguna dan Petunjuk Instalasi

en Installation instructions

18.4 Corner installation

Observe the installation dimensions and the installation

instructions when installing in a corner.

¡ To ensure that the appliance door can be opened,

you must take the minimum dimensions into consid-

eration when installing in a corner. The dimension

is dependent on the thickness of the unit front and

the handle.

18.5 Electrical connection

In order to safely connect the appliance to the elec-

trical system, follow these instructions.

¡ The appliance corresponds to protection class I and

must only be operated with a protective earth con-

nection.

¡ The fuse protection must correspond to the power

rating specified on the appliance's rating plate and

to local regulations.

¡ The appliance must be disconnected from the

power supply whenever installation work is being

carried out.

¡ Contact protection must be ensured during the in-

stallation.

Electrically connecting an appliance without a

protective contact plug

Note: Only a licensed professional may connect the ap-

pliance. Damage caused by incorrect connection is not

covered under the warranty.

An all-pole isolating switch must be integrated into the

permanent electrical installation according to the install-

ation regulations.

Identify the phase and neutral conductors in the

socket.

The appliance may be damaged if it is not connec-

ted correctly.

Connect the hob in accordance with the connection

diagram.

See the rating plate for the voltage.

Connect the wires of the mains power cable accord-

ing to the colour coding:

Green/yellow = Protective conductor

‒

Blue = Neutral conductor

‒

Brown = Phase (external conductor)

‒

18.6 Installing the appliance

Remove the transport locks on the right and left and

then dispose of them.

The appliance must be transported by two people

using the carry handles on the right and left, while

securing the front of the appliance with one hand.

Place the appliance in the unit and fold the carry

handles down.

Push the appliance in fully.

Do not kink or trap the connecting cable, or route it

over sharp edges.