Bosch 8 Series Panduan Pengguna dan Petunjuk Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna dan Petunjuk Instalasi untuk Mesin cuci Bosch 8 Series. Bosch 8 Series 28 halaman. Combi steam oven
Juga untuk Bosch 8 Series: Panduan Petunjuk Instalasi (21 halaman), Petunjuk Perakitan (4 halaman), Petunjuk Instalasi dan Penggunaan Manual (16 halaman), Panduan Referensi Cepat (2 halaman), Panduan Pengguna dan Petunjuk Instalasi (44 halaman), Memulai (7 halaman), Buku Petunjuk (32 halaman), Panduan Pengguna dan Petunjuk Instalasi (32 halaman), Buku Petunjuk (12 halaman), Panduan Pengguna dan Petunjuk Instalasi (24 halaman), Panduan Pengguna (28 halaman), Petunjuk Instalasi dan Penggunaan Manual (20 halaman), Panduan Pengguna dan Petunjuk Instalasi (44 halaman), Buku Petunjuk (12 halaman), Panduan Pengguna dan Petunjuk Instalasi (40 halaman), Panduan Pengguna dan Petunjuk Instalasi (32 halaman), Informasi Untuk Penggunaan (20 halaman), Buku Petunjuk (48 halaman)

Halaman Cetak
Bosch 8 Series Panduan Pengguna dan Petunjuk Instalasi
en Before using for the first time
For most selection lists, e.g. programmes, the first
point begins again following the last point. For some
selection lists, e.g. cooking time, rotate the control ring
back again once the minimum or maximum value has
been reached.
Display
You can see the current setting values or options in the
display.
Display
Highlighted information
Enlargement
Display ring
There is a display ring around the outside of the dis-
play.
If you are changing a value, the display ring shows you
where you are in the selection list.
Depending on the settings area and the length of the
selection list, the display ring may be either a continu-
ous or a segmented line.
When the appliance is in operation, the display ring
shows the progress and turns red at one-second inter-
vals. After every full minute, the segments are filled
again from the beginning. As the cooking time counts
down, one segment disappears every second.
4.2 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Interior lighting
When you open the appliance door, the interior lighting
switches on. If the appliance door remains open for
longer than approx. 5 minutes, the interior lighting
switches off again.
5  Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
5.1 Initial use
When the appliance is connected to the power supply
for the first time or following a lengthy power failure, the
settings for the initial start-up of your appliance appear.
Notes
¡ You can adjust the settings at any time in the basic
settings.
→ "Basic settings", Page 13
8
Description
The highlighted value can
be changed directly
without selecting the
value beforehand. Once
an operation starts, the
duration is always high-
lighted.
As long as you use the
control ring to change the
highlighted value, only
this value is displayed lar-
ger.
With most types of heating and functions, the interior
lighting remains on while the appliance is in operation.
The interior lighting switches off again when the opera-
tion stops.
Cooling fan
The cooling fan switches on and off as required. The
hot air escapes through the ventilation slots above the
appliance door.
ATTENTION!
Covering the ventilation slots will cause the appliance
to overheat.
▶
Do not cover the ventilation slots.
To cool the cooking compartment more quickly after
operation, the cooling fan continues to run for a certain
period afterwards. If the appliance is running in mi-
crowave operation, the appliance remains cool, but the
cooling fan still switches on. The cooling fan may con-
tinue to run even when microwave operation has
ended.
Condensation
Condensation can occur in the cooking compartment
and on the appliance door when cooking. Condensa-
tion is normal and does not adversely affect appliance
operation. Wipe away the condensation after cooking.
Automatic door opener
If you press the automatic door-opener, the appliance
door springs open. You can fully open the appliance
door manually.
Notes
¡ In the event of a power failure, the automatic door-
opening does not work. You can open the door
manually.
¡ If you open the appliance door during operation,
this pauses the operation.
¡ When you close the appliance door, the operation
does not continue automatically. Start the operation.
¡ If the appliance is switched off for an extended
period of time, the appliance door opens with a time
delay.
¡ Open and close the appliance door for the internal
inspection before the initial start-up or after any
power failure.
Setting the language
1.
Use the control ring to set the language.
2.
Press
⁠ .
a The display shows the next setting.
Setting the time
1.
Use the control ring to set the time.