Bosch Axxis WFL 2090 Panduan Petunjuk Pengoperasian, Perawatan, dan Pemasangan - Halaman 34

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian, Perawatan, dan Pemasangan untuk Mesin cuci Bosch Axxis WFL 2090. Bosch Axxis WFL 2090 36 halaman. Axxis lavadora
Juga untuk Bosch Axxis WFL 2090: Panduan Petunjuk Pengoperasian & Perawatan (37 halaman), Petunjuk Pengoperasian dan Pemasangan (37 halaman), Panduan Petunjuk Pengoperasian, Perawatan, dan Pemasangan (36 halaman), Petunjuk Pengoperasian (Bahasa Inggris) (37 halaman)

WARNING

To reduce the risk of fire or electrical shock,

DO NOT use an extension cord or an adapter to

connect the washer to the electrical power

supply.

In the event that a ground fault circuit breaker is

to be used, only use types marked with the

following symbol:

Only this symbol can guarantee compliance with all

current regulations.

Do not insert/remove the power cord with wet or

damp hands.

Handle the plug body only when removing the plug

from the socket.

Transport, e.g. when moving

Before transporting the washing machine:

Turn off the water,

Release the water pressure in the supply hose

(refer to page 22),

Drain any remaining water (refer to page 20),

Disconnect the washing machine from the

electrical outlet.

Dismantle the supply and drainage hose,

Install all transport bolts.

Having transported the appliance and ensured

proper installation and connection, allow the Drain

program to run through before starting the first

wash program.

Preparing and inserting the transport bolts

q Remove the 4 covers.

q Prepare the transport bolts:

Loosen the screw in the sleeve until the end of

the screw is level with the end of the sleeve.

q Insert and tighten transport bolts 1,2,3 and 4.

The lug on the washing machine must be

located in the groove in the rear panel of the

housing.