Bosch Classixx 1200 Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Mesin cuci Bosch Classixx 1200. Bosch Classixx 1200 24 halaman. Washing machine
Juga untuk Bosch Classixx 1200: Panduan Cepat (4 halaman), Buku Petunjuk (48 halaman), Panduan Instalasi Cepat (12 halaman)

Halaman Cetak

1200 Series IP Video Storage System

–

1.5

General Safety Precautions

–

1.6

System Safety

Electrostatic discharge (ESD) is generated by two objects with different electrical charges

coming into contact with each other. An electrical discharge is created to neutralize this

difference, which can damage electronic components and printed circuit boards. The

following measures are generally sufficient to neutralize this difference before contact is

made to protect your equipment from ESD:

–

Bosch Sicherheitssysteme GmbH

DVD-ROM laser: CAUTION - This server may have come equipped with a DVD-ROM drive.

To prevent direct exposure to the laser beam and hazardous radiation exposure, do not

open the enclosure or use the unit in any unconventional way.

Keep the area around the chassis clean and free of clutter.

Place the chassis top cover and any system components that have been removed away

from the system or on a table so that they won't accidentally be stepped on.

While working on the system, do not wear loose clothing such as neckties and

unbuttoned shirt sleeves, which can come into contact with electrical circuits or be

pulled into a cooling fan.

Remove any jewelry or metal objects from your body, which are excellent metal

conductors that can create short circuits and harm you if they come into contact with

printed circuit boards or areas where power is present.

After accessing the inside of the system, close the system back up and secure it to the

rack unit with the retention screws after ensuring that all connections have been made.

Do not use mats designed to decrease electrostatic discharge as protection from

electrical shock. Instead, use rubber mats that have been specifically designed as

electrical insulators.

Use a grounded wrist strap designed to prevent static discharge.

Keep all components and printed circuit boards (PCBs) in their antistatic bags until ready

for use.

Touch a grounded metal object before removing any board from its antistatic bag.

Do not let components or PCBs come into contact with your clothing, which may retain a

charge even if you are wearing a wrist strap.

Handle a board by its edges only; do not touch its components, peripheral chips, memory

modules or contacts.

When handling chips or modules, avoid touching their pins.

Put the serverboard and peripherals back into their antistatic bags when not in use.

For grounding purposes, make sure your computer chassis provides excellent

conductivity between the power supply, the case, the mounting fasteners and the

serverboard.

Installation Manual

Safety Instructions | en

DOC | V1 | 2010.08