Bosch Nexxt washer Operating Panduan Petunjuk Pengoperasian, Perawatan, dan Pemasangan - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian, Perawatan, dan Pemasangan untuk Mesin cuci Bosch Nexxt washer Operating. Bosch Nexxt washer Operating 27 halaman.
Juga untuk Bosch Nexxt washer Operating: Panduan Petunjuk Pengoperasian, Perawatan, dan Pemasangan (37 halaman), Panduan Petunjuk Pengoperasian, Perawatan, dan Pemasangan (26 halaman)
Halaman Cetak
Panel
Buttons for additional options
(in addition to the program if required)
Bleach: A bleach cycle will be added to the
selected program.
Rinse Plus: Additional rinsing cycle.
Power Wash: Increased wash time for heavily
soiled loads.
Additional options can be combined at any time.
Additional option selected:
Indicator light is lit red.
Switch off additional option:
Press button again. Indicator light turns off.
Start/Pause button
Starts or interrupts the washing cycle
(program must first be selected).
Indicator light
Indicator light flashes red: Settings can be
changed, the wash cycle can be started,
door is locked for reasons of safety or
program is in Pause" mode.
Indicator light is lit red: Program is running
and "Pause" can be activated.
The indicator light is off: Program is
finished or no program selected.
Display
The Ready in time is displayed, if a program is
selected.
The Start time is displayed, if this function is
additionally selected.
Indicator lights
The door locked lights up if a program is selected and
the Start button is pressed.
The wash, rinse and spin lights up if the respective
program segment runs.
The finished lights up if the program has ended.
Indicator lights flash: Operation error!
Delay Start button
The Start time can be delayed by hours up to a
maximum of 19 hours (if required).
The display shows the Delay Start time.
Spin Selection button
For changing the spin speed (if required). The indicator
light of the selected spin speed is lit red.
Program selector
Switches the machine on and off and selects
the program. Can be turned in both directions.
The program selector does not turn while the program
is running - the program sequence is electronically
controlled.
13