Bosch Programme Table Buku Petunjuk - Halaman 2

Halaman Cetak

Steam Drying - Steam Refresh

Steam programmes for unwrinkling or refreshing

Your water tank empties automatically after the programme has finished.

– Your dryer has unwrinkling and refreshing programmes that can be used for reducing

odours and minimising creasing in dry fabrics. Steam smooths and freshens up items of

Filling the water tank:

clothing.

– Sorting the laundry according to size, weight, fabric and colour is necessary.

Fill the dryer's water tank with distilled water before every Steam Dry - Steam Refresh cycle.

– Only use Short spin/Refresh for fabrics with the same properties.

– During steam generation (required), additional noises may occur.

1. Move the programme selector to Steam Dry

– The result of refreshing and unwrinkling may vary depending on the type of fabric, size of

or Steam Refresh .

the load and programme selected.

The

symbol appears in the display.

– After unwrinkling or refreshing, all fabrics must be removed immediately and hung crease-

free on a hanger or a washing line for 15 minutes.

Programmes

2. Remove the condensation tank completely.

Please observe the treatment symbols and manufacturer's instructions on the fabrics.

Do not use Short spin/Refresh for fabrics made of wool, leather, containing metal or

Before every Steam Dry - Steam Refresh cycle, fill the water tank with

wooden parts as well as wax and oil jackets!

distilled water only. Do not use tap water, condensation or additives.

Do not use any dryer cleaning sets!

Steam Dry

3. Fill the water tank. Use the jug supplied.

Minimum Iron Shirt

Suitable for easy-care fabrics, e.g. formal shirts. Fabrics are smoothed. You can expect

optimum results if "non-iron" appears on the care label. After the programme has finished,

If the water tank filter is dirty

the items must be removed immediately and hung crease-free on a hanger or washing line

See page 4.

for 15 minutes. The programme is for up to 5 formal shirts.

Minimum Iron Daily Load

Suitable for hard-wearing cotton fabrics, e.g. bed linen, tablecloths or formal shirts. Fabrics

are smoothed. You can expect optimum results if "non-iron" appears on the care label. After

4. Pour the distilled water into the filling hole on the water tank,

the programme has finished, the items must be removed immediately and hung crease-free

until the

symbol goes out on the display panel.

on a hanger or washing line for 15 minutes. The programme is for up to 5 formal shirts or

1 to 2 larger items.

If drying the recommended load, approximately 250 to 300 ml of distilled

water is used in the Steam Dry - Steam Refresh programmes.

Steam Refresh

5. Insert the condensation container all the way.

Business

Suitable for refreshing suits, jackets and trousers, or dry-clean items that cannot be washed

in the washing machine

see the care label. The programme only refreshes fabrics and

does not clean them. After the end of the programme, the items must be removed

immediately. Programme for 1 suit or 1 to 2 smaller items.

Freshen up

6. Start the Steam Dry or Steam Refresh programme.

Suitable for refreshing casual wear made of cotton or artificial fibres. Fabrics must be

suitable for dryers

see the care label. The programme refreshes fabrics only, and does

not clean them. After the programme has finished, the fabrics must be removed

immediately. Programme for 1 pullover, 2 pairs of trousers or formal shirts.

Installation

– Scope of delivery: dryer, installation and instruction manual, jug, basket for woollens

Cleaning is therefore not required

(depending on the model).

– Check dryer for transport damage.

– The dryer is heavy. Do not attempt to lift it on your own.

– Be careful to avoid sharp edges.

– Do not install in a room where there is a risk of freezing. Freezing water may cause damage.

– If in doubt, have the appliance connected by a specialist.

– Do not lift the dryer by protruding parts (e.g. the door) - risk of breakage.

Setting up the dryer

Remove all accessories

– The appliance plug must always be accessible.

from the drum.

The drum must be empty.

– Ensure that the appliance is installed on a clean, level

and firm surface.

– Keep the cooling grille on the front of the dryer

clear.

– Keep the area around the dryer clean.

– Level the dryer using the threaded feet.

Use a spirit level.

– Do not remove the threaded feet under any

circumstances.

Do not install the dryer behind a door or sliding

door, which could prevent or restrict opening of the

dryer door. This will prevent children from locking

clean the filter in the water tank.

themselves in and putting their lives in danger.

Mains connection

see safety information

Page 13.

– Connect to an AC earthed socket. If in doubt, have the socket checked by a specialist.

– The mains voltage and the voltage shown on the rating plate (

Page 11) must be the same.

– The connected load and necessary fuse protection are specified on the rating plate.

Do not operate the dryer if there

Frost protection / Transport

is a danger of frost.

Preparation

1. Empty the condensation container

Page 4.

2. Select any programme using the programme selector.

3. Press the

Start/Stop button

condensation is pumped into the container.

4. Wait 5 min., and then empty the condensation container again.

5. Turn the programme selector to Off.

The water tank must not contain any distilled water. If necessary, run the Steam/Refresh programme.

Technical data

What to do if...

Dimensions (DxWxH)

60 x 60 x 85 cm (adjustable height)

Weight

approximately 43.5 kg

Max. capacity

8 kg

Condensation container

4.0 l

Water tank

approx. 0.4 l

Connection voltage

220-240 V

Connected load

max. 2800 W

Fuse protection

13 A

Ambient temperature

5 - 35 °C

Product number

Inside of door

Production number

The rating plate can be found on the back of the dryer.

Consumption rates

These are guide values determined under standard

conditions.

Spin speed in rpm

Drying time

Energy

(residual moisture)

in min.**

consumption

in kWh**

Cottons 8 kg

Cupboard Dry*

1400

(approx. 50 %)

105

3.74

1000

(approx. 60 %)

122

4.49

800

(approx. 70 %)

139

5.17

Iron Dry*

1400

(approx. 50 %)

2.24

Clean and level

Make sure that the air inlet

1000

(approx. 60 %)

100

3.44

remains unobstructed

800

(approx. 70 %)

117

3.86

Easy-Care 3.5 kg

1000

1.05

Cupboard Dry*

800

(approx. 40 %)

1.35

600

(approx. 50 %)

1.65

*Test programme to DIN EN 61121

**The values may differ from those given, depending on overvoltage and undervoltage, the

type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and

the size of the load.

Drum interior light (bulb E14, 25 W)

The drum is illuminated after the door is opened or closed, and after the programme has

started. The light goes out automatically. To change the bulb

Page 12.

Optional accessories

(order from the after-sales service using the order number)

Connecting kit for condensation outlet

WTZ

1110

The condensation is drained off immediately via a hose.

Washer-dryer stack connection set

WTZ

The dryer can be stacked on top of a suitable washing machine of the same depth and width,

11310

to save space. The dryer must be secured to the washing machine with this connection set.

With pull-out worktop: WTZ 11300

Installation underneath the worktop

WTZ

Instead of the appliance covering plate, you must have a metal cover fitted by a specialist.

10290

Safety instructions

If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales

Emergency

– Pull the appliance plug out of the socket immediately or disconnect the fuse.

service. We will always find an appropriate solution and will avoid unnecessary visits by

ONLY use the

– in rooms inside the house.

engineers. Trust the expertise of the manufacturer and rest assured that the repair will be

dryer...

– for drying or unwrinkling/refreshing fabrics.

carried out by trained service technicians using original spare parts. The contact details of your

local after-sales service can be found in the enclosed after-sales service directory, or by

The dryer must

– be used for purposes other than those described above.

calling one of these numbers:

NEVER...

– be modified in terms of its technology or properties.

– GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.

Hazards

– The dryer must not be used by children or persons who have not been

A call set-up fee of up to 6 pence may apply.)

instructed in its use.

– IE 01450 2655

– Do not leave children unsupervised near the dryer.

When contacting the after-sales service, please quote the appliance's product number (E no.)

– Keep pets away from the dryer.

and production number (FD) (see the inside of the door).

Set the programme selector to Off and remove the appliance plug from the socket.

– Remove all objects from pockets,

and lighters in particular

The

Start/Stop indicator light

Mains plug plugged in?

does not come on.

Programme selected?

– Do not lean or sit on the door

– Open the door carefully. Hot steam may escape. The clothes and drum may

The

symbol and

Start/Stop

Empty the condensation container

Page 4.

indicator light are flashing.

Check the condensation outlet hose, if applicable (kink).

be hot

risk of burns.

The

symbol and

Start/Stop

Clean the air cooler

Page 6 "Cleaning and care". Clean the

Installation

– Secure loose leads or hoses, otherwise there is a risk of tripping.

indicator light are flashing.

fluff filter

Page 4.

– Below 0 °C there is a possibility of frost damage.

The

symbol flashes.

Is the water tank empty?

Mains

– Connect the dryer according to specifications to an AC earthed socket,

Filling with distilled water

Page 9.

connection

The Steam Dry - Steam Refresh

The filter in the water tank may have become dirty.

otherwise it cannot be guaranteed that the appliance is completely safe.

does not start.

If so, clean the filter in the water tank

Page 4.

– The cable cross-section must be sufficient.

Dryer does not start.

Has the

Start/Stop button been pressed? Is the door closed?

– Only use earth-leakage circuit breakers with the following symbol:

Programme set?

– The appliance plug and socket must be compatible.

Ambient temperature greater than 5 °C?

– Do not use multiple plugs/connectors and/or extension cables.

Water is leaking out.

Make sure the dryer is level.

Clean the air cooler seal.

– Do not touch or hold the appliance plug with wet hands

The door opens by itself.

Push the door closed until you hear it click into place.

risk of electric shock.

– Never pull the appliance plug out of the socket by its cable.

Items crease even though the

Laundry load exceeded?

– Do not damage the mains lead

Steam Dry - Steam Refresh

Remove articles of clothing immediately after the end of the

programme has been selected.

programme, hang up and pull into shape.

Operation

– Only laundry must be loaded into the drum.

Creasing.

Laundry load exceeded?

Before switching on the dryer - check the contents.

Remove articles of clothing immediately after the end of the

– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,

programme, hang up and pull into shape.

grease or paint (e.g. hair setting spray, nail polish remover, stain remover,

Unsuitable programme selected

Page 7.

cleaning solvent, etc.)

Drying result is not satisfactory

Warm laundry feels damper than it actually is.

– Hazard caused by dust (e.g. coal dust, flour): do not use the dryer

(laundry feels too damp).

The selected programme does not suit the load. Use another

risk of explosion.

drying programme or, in addition, select the time programme

– Do not put laundry containing foamed material/rubber in the dryer

Page 7.

material may be destroyed and the dryer may be damaged due to possible

Use fine adjustment for the drying result

Page 1/2.

Fine layer of limescale on the humidity sensors

deformation of the foamed material.

Clean the humidity sensors

Page 6.

– Switch off the dryer once the programme has ended.

Programme termination, e.g. tank full, mains power supply

– For unwrinkling/refreshing fabrics, use distilled water only. Do not use

failure, door open or maximum drying time reached.

condensation, tap water or additives.

Drying time too long.

Rinse the fluff filters under running water

Page 4.

– Distilled/condensation water is not for drinking.

Insufficient supply of air

ensure that air can circulate.

Air inlet possibly blocked

Clear inlet

Page 10.

Defect

– Do not use the dryer if it is defective or if you suspect that it is.

Ambient temperature higher than 35 °C

ventilate the room.

Repairs must only be carried out by the after-sales service.

The humidity in the room increases

Make sure the room is sufficiently ventilated.

– Do not use a dryer with a faulty mains lead. To prevent risks, a faulty mains

significantly.

lead must only be replaced by the after-sales service.

One or more programme status

Clean the filter and air cooler under running water

Page 4/6.

– Before changing the bulb of the interior light make absolutely sure you have

indicator lamps are flashing.

Check the installation conditions

Page 10.

pulled the appliance plug from the socket

Switch off, allow to cool, switch on again and restart the

programme.

Spare parts

– Only use genuine spare parts and accessories for safety reasons.

The interior light (depending on the

Unplug the appliance plug, fold back the cover cap on the inside

Disposal

– Dryer: unplug the appliance plug, then cut the mains lead from the appliance.

model) does not work.

above the door (using a Torx 20 screwdriver)

Dispose of the dryer at an approved public disposal facility.

and replace the bulb. Close the cover cap.

– Packaging: keep all packaging out of reach of babies and children.

danger of suffocation.

– All materials are environmentally safe and recyclable. Dispose of in an

environmentally-responsible manner.

risk of explosion.

risk of tipping.

risk of electric shock.

fire/explosion hazard.

elastic

Dryer

en Instruction manual

risk of electric shock.