Draper Clarion Petunjuk Perakitan/Pemasangan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Perakitan/Pemasangan untuk Layar Proyeksi Draper Clarion. Draper Clarion 2 halaman. Permanently tensioned projection screen
Juga untuk Draper Clarion: Petunjuk Perakitan/Pemasangan (4 halaman), Petunjuk Perakitan/Pemasangan (4 halaman), Petunjuk Perakitan/Pemasangan (2 halaman), Petunjuk Perakitan/Pemasangan (3 halaman)
Halaman Cetak
Clarion by Draper
The screen frame is assembled and ready for fi xed wall mounting or
at tach ment to tilting angles.
Figure 6
System Components
Bracing Confi gurations
Note: Sizes smaller than those shown require no bracing.
Style I required for
5'
50 x 50
6'
60 x 60
78" 70 x 70
7'
84 x 84
90"
8 x 8
100"
4 x 8
10'
Style III required for 5 x 15
www.draperinc.com
Wall Mounting of Frames
➀ Mount 2, 3, or, 4 aluminum brackets (provided) on wall at de sired height. Use
carpenters level to ensure brackets are level. When the screen is mounted, the
top of the frame will be
1
/
" above the top of these brackets. ¾" of free space is
8
required above these brackets. When the screen is set on the mounting
brackets, pull down gently to ensure that the engagement is snug and secure.
➁ Screen should be positively and securely supported so vibration or abusive
handling will not cause it to work loose or fall. The in stall er must insure that
fasteners are of adequate strength and suitable for mounting surface chosen.
Trim Frame has lip on rear side
Style II required for
150"
15'
9 x 9
10 x 10
6 x 12
3 x 9
4 x 12
5 x 10
Style IV required for 6 x 18
(765) 987-7999
Page 2 of 2
Viewing Surface
Wall Mounting Brackets
Figure 7