Draper FlexShade Petunjuk Manual - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Layar Proyeksi Draper FlexShade. Draper FlexShade 7 halaman. Exterior clutch-operated shade
Juga untuk Draper FlexShade: Panduan Pemasangan & Pengoperasian (8 halaman), Petunjuk Instalasi (2 halaman), Petunjuk Manual (12 halaman), Petunjuk Pemasangan & Pengoperasian (11 halaman), Petunjuk Pemasangan & Pengoperasian (12 halaman), Petunjuk Pemasangan & Pengoperasian (16 halaman), Petunjuk Pemasangan & Pengoperasian (4 halaman), Petunjuk Pemasangan & Pengoperasian (12 halaman), Petunjuk Pemasangan & Pengoperasian (16 halaman)

Halaman Cetak
Draper FlexShade Petunjuk Manual
Dual Roller 12V Battery FlexShade

Section 4 - Pocket Headbox Installation

PLEASE NOTE: Installer must provide adequate clearance for
removal of Roller Assembly during installation and maintenance.
PLEASE NOTE: Headbox must be mounted directly to ceiling, or
to a continuous blocking that is secured to building structure.
Figure 6-B
1.
2.
Mark location of optional
pre-drilled pocket
mounting holes and
endcap mounting holes
on top side of headbox
on mounting surface.
Figure 6-D
Endcaps mounted
to continuous
blocking (by others)
secured to
building
structure.
Lift headbox into
mounting position.
®
Figure 6-A
Figure 6-C
3.
Drill small
starter hole
(if necessary)
in mounting
surface.
Closure
Panel
Headbox
Closure
Headbox
Panel
Ceiling
(by others)
page 5 of 7
4.
Mount pocket
headbox using
appropriate
fasteners for
surface.
5.
Mount endcaps using
appropriate fasteners
for surface
.
(Section 1)
6.
Mount pocket
closure.
.
(Fig. 6-D)