Draper Targa Petunjuk Pemasangan & Pengoperasian - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Pengoperasian untuk Layar Proyeksi Draper Targa. Draper Targa 2 halaman. Electrically operated projection screen with motor-in-roller
Juga untuk Draper Targa: Petunjuk Pemasangan & Pengoperasian (4 halaman), Petunjuk Pemasangan & Pengoperasian (2 halaman), Petunjuk Pemasangan & Pengoperasian (2 halaman), Petunjuk Pemasangan & Pengoperasian (4 halaman), Petunjuk Pemasangan & Pengoperasian (2 halaman), Petunjuk Pemasangan & Pengoperasian (3 halaman), Petunjuk Instalasi dan Pengoperasian (4 halaman), Petunjuk Pemasangan & Pengoperasian (2 halaman), Petunjuk Pemasangan & Pengoperasian (2 halaman), Petunjuk Manual (8 halaman)

Draper Targa Petunjuk Pemasangan & Pengoperasian
Targa by Draper
Types of Installation
Wall Mounted
Appropriate hardware
provided by installer.
Methods of Installation
Fasteners for
wall mounting
by others.
7
/
" hole for
8
electrical
connection.
Optional Ceiling Opening Trim Kit
(Dims-Side View)
8"
1
2
/
"
8
4"
3
6
/
"
4
Limit Adjustments (Built-in Low Voltage Motors) (Cont)
Please Note: Pressing and releasing the UP arrow on the switch will move
the viewing surface to its upper limit. Pressing and releasing the DOWN arrow
will move the viewing surface to its lower limit. While the motor is in motion,
pressing the STOP button for less than two seconds
will stop the viewing surface at its present position.
Once the motor is stopped, pressing the STOP button
will move the viewing surface to its alternate format
position. Pressing and holding the STOP button, when
the motor is at rest or in
SW1
SW2
motion, for at least three
ON
OFF
seconds will record a new
alternate format position.
OFF
ON
OFF
OFF
Suspended
6" Extension
Bracket
6"
Appropriate hardware
provided by installer.
S Hooks for
suspended
installation
by others.
1
2
/
"
16
1
1
/
"
16
D
G
U
p
o
r
5V
w
o
n
u
n
d
P
O
T
S
P
O
T
S
FUNCTION
Set LOWER limit
Set UPPER limit
1 2
Record Position/
Normal Operation
OFF
Back View
www.draperinc.com
1
5
/
"
4
5
2
/
"
16
7
5
/
"
8
/
" dia.
7
8
electrical
connection
hole
Wiring Diagrams—110-120V Motor and Quiet Motor
Single Station Control
Internal Screen Wiring
White (Common)
Black (Down)
Red (Up)
Green (Ground)
Dashed wiring
by electrician
Control
Single gang box by others
1
switch
Min. 4" x 2
Blue
Red
Black
Location of key
operated on-off
switch if furnished
To 110-120V Line
Wiring Diagrams—110-120V Motor and Quiet Motor
with Built-in Low Voltage Controller
Single Low Voltage Control
Internal Screen Wiring
White (Neutral)
Black
Green (Ground)
Dashed wiring
Data Cable
by electrician
Wall Switch,
RF or IR
Receiver,
or integrated
control system
+
To 110-120V Line
To
Motor
(765) 987-7999
Case Dimensions
Fabric width + 7"
1
3
/
"
2
Multiple Station Control
Red
7
/
" x 1
/
" deep
8
8
Black
Red
Black
Red
Black
Location of key
operated on-off
switch if furnished
To 110-120V Line
Multiple Low Voltage Controls
Dashed wiring
by electrician
To 110-120V Line
Page 2 of 2
Viewing
surface
Internal Screen Wiring
White (Common)
Black (Down)
Red (Up)
Green (Ground)
Cap off with wire
nut and tape
Blue
Dashed wiring
by electrician
Blue
Blue
Single gang box by others
1
7
Min. 4" x 2
/
" x 1
/
" deep.
8
8
3 shown. More or less equally
feasible.
Internal Screen Wiring
White (Neutral)
Black
Green (Ground)
Data
Cables
Wall Switches,
RF or IR
Receivers,
or integrated
control systems