Bosch WAE24377GB SERIES Buku Petunjuk dan Petunjuk Instalasi - Halaman 17

Jelajahi secara online atau unduh pdf Buku Petunjuk dan Petunjuk Instalasi untuk Mesin cuci Bosch WAE24377GB SERIES. Bosch WAE24377GB SERIES 36 halaman.

Halaman Cetak

Rinse eyes or skin thoroughly if they

come into contact with detergent/care

products.

If swallowed accidentally, seek medical

advice.

Dilute viscous fabric softener and

Note:

fabric conditioner with water; this

prevents blockages.

Pour the detergent and care products

into the appropriate compartments:

Measuring aid A For liquid detergent

Compartment II

Detergent for the main wash,

water softener, bleach, stain

remover

Compartment i Softener, starch.

Do not exceed the maximum

Compartment I

Detergent for prewash

Pull out the detergent drawer as far

as possible.

Add detergent and/or care products.

Close the detergent drawer.

Measuring aid* for liquid detergent

*Depending on the model

Position the measuring aid for

measuring the correct amount of liquid

detergent:

Pull out the detergent drawer. Press

down the insert and fully remove the

drawer.

Slide the measuring aid forwards,

fold it down and click it into place.

Reinsert the drawer.

Operating the appliance

Do not use the measuring aid for

Note:

gel detergents and washing powder, or

for programmes with prewash or when

the "Finished in" time is selected.

For models without a measuring aid,

pour the liquid detergent into the

appropriate dispenser and place it in

the drum.

Start the programme

Select the Start/Reload button. The

indicator lamp lights up and the

programme starts.

During the programme, the display

panel shows the "Finished in" time or,

after starting the wash programme, the

programme duration and the symbols

for the programme progress.

~ Page 9

If you want to lock the

Note:

programme to prevent it from being

inadvertently adjusted, you can select

the childproof lock as follows.

Childproof lock

You can lock the washing machine to

prevent the functions you have set from

being changed inadvertently. To do this,

activate the childproof lock after starting

the programme.

To activate/deactivate the childproof

lock, press and hold "Start/Reload" for

approx. five seconds. The E symbol

appears on the display panel.

E lights up: The childproof lock is

■

active.