Bosch WAE28368GB Instructions for Use, Programme Table Buku Petunjuk - Halaman 4
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin cuci Bosch WAE28368GB Instructions for Use, Programme Table. Bosch WAE28368GB Instructions for Use, Programme Table 8 halaman. Front-load washing machine
Halaman Cetak
Before washing for the first time
Wash once without any laundry
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
our liquid detergent into the appropriate dispenser and place in the drum.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Setting** and adjusting programmes
**If the
display panel, the childproof lock
Programme selector
is active
Additional functions, the options
button and spin speeds
Individual settings, page 5.
All buttons are sensitive and need
only to be touched lightly. Press
and hold the options and spin
speed buttons to run through the
setting options automatically.
displays:
ng, rinsing, spinning
page 9.
page 7.
page 6.
Measure accordingly:
1
symbol flashes in the
deactivate, page 5.
Start/Reload
2
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
Washing
Detergent drawer with
compartments I, II,
Drum
Control panel
Washing machine
door
Service flap
Washing
3
Removing the washing
Open the washing machine door and remove the washing.
If Rinse Hold (without final spin) is active: Turn the
programme selector to
Drain or select the spin speed.
Press
Start/Reload.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models
instructions.
Switching off
Turn the programme selector to Off.
End of programme when ...
...
Start/Reload flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select
Rinse/
– Press
Start/Reload.
3
Programmes at lower temperatures:
–
Rinse/
Spin (deactivate
select
Drain.
– Press
Start/Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press
Start/Reload. The new programme starts from
the beginning.
Reloading laundry, if ...
...
Start/Reload selected and then YES is lit in the
display panel. If NO is lit, the washing machine door
cannot be opened.
– Press
Start/Reload.
Refer to installation
Spin .
Aqua Plus button) or
page 5
4