Draper 83646 Petunjuk Manual - Halaman 10

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Alat Listrik Draper 83646. Draper 83646 16 halaman. 2000w 230v hot air gun

BASIC HOT AIR GUN OPERATIONS

NOTE: Remove the plug from the socket before carrying

out adjustment, servicing or maintenance.

IMPORTANT: Ensure that the machine is switched OFF

before connecting to the power supply.

8.1 ON/OFF SWITCH - FIG.1

The ON/OFF switch

Position 0 is off.

Position 1 is "cool heat" which is a steady 50°C heat

(approx.) at 500 L/min

Position 2 is 450°C (approx.) at 250L/min.

Position 3 is 600°C (approx.) at 500L/min.

8.2 FREESTANDING OPERATION - FIG.2

This hot air gun can be positioned freestanding. This

allows the user to have both hands free which is

essential for certain applications, e.g. pipe bending,

plastic welding, etc. Position the hot air gun on it's end,

only on a level suitable surface.

NOTE: Never leave the hot air gun unattended or

switched on.

The following instructions should only be used as a

guide as the ideal temperature should be ascertained by

performing a test on the workpiece. Heating efficiency

will vary depending on the properties of the workpiece,

and the distance kept between the metal nozzle and

the workpiece itself.

IMPORTANT: THERMAL OVERLOAD PROTECTION:

Please note this machine is fitted with a safety thermal

overload protection. If the product, is continuously used

too close to the workpiece resulting in over heating and

the machine potentially catching fire, the thermal

overload protection will be activated and stop the

machine. This feature will reset once temperature has

fallen (approx 2mins).

NOTE: The heat gun fan continues to run when the

thermal overload protection is activated, this draws cool

air through the heatgun to cool it down as quickly as

possible.

WARNING: Remember the nozzle will remain hot for

sometime - a safe storage location should be used.

has four positions/settings.

FIG.1

FIG.2