Draper BMSM Petunjuk Penggunaan Manual - Halaman 16

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan Manual untuk Alat Listrik Draper BMSM. Draper BMSM 20 halaman. Bench mounted spindle moulder

Halaman Cetak

- Variable Speed (Fig.28):

- The spindle moulder is fitted with a variable speed dial

, the dial has 5 settings with 1 being the slowest

and 5 being the highest

- Router bit height adjustment (Figs.29&30):

- The spindle moulder has a spindle travel of 0-40mm,

the height can be changed by turning the hand wheel

left or right depending on whether the router bit

needs to go up or down, the height can be measured

on the adjacent scale and locked off using the adjacent

plastic hand wheel

- Attaching the metal height adjustment hand wheel:

- Line up the pin in the shaft with the cut-out on the

hand wheel

Y supplied

- Adjustable left fence plate:

- The left fence plate can be adjusted to support the cut

end of a work piece when using a cutter to reduce the

size of material. The fence can be brought forward by

loosening the middle plastic nut, the position of the

fence can be gauged by using the measuring scale on

the table.

OPERATION AND USE

and secure with the dome headed nut

FIG.28

FIG.30

FIG.31

- 15 -

FIG.29