AirStage ASUA12RLAV Panduan Instalasi - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pendingin Udara AirStage ASUA12RLAV. AirStage ASUA12RLAV 15 halaman. Indoor unit (wall mounted type)
Halaman CetakImportant: Be sure to insulate the connection between the wires.
Insulated connection
Field supply
• Connection terminals
Controller PCB
• Wiring arrangement
PCB
Option parts
External input/output wire
Output Terminal (CN8)
Input Terminal (CN9)
Binder
6.6. Installing the control unit
• Refer to 6.1 (1) ~ (5) to install the control unit, thermistor, and earthing (grounding) wire.
(1) Connect the connection cable.
For U.S.A. and Canada
Wired remote controller
cable and optional parts
cables (if necessary)
Screw
Transmission cables
For others
Wired remote controller
cable and optional parts
cables (if necessary)
Screw
Transmission cables
L1, L2 (N): Power
supply cable
Power supply
earth (ground)
cable
Do not route the cables over the screw hole.
Good
Cable
Screw hole
When you attach the cable clamp, make sure that the cables are not jutting out
from the clamp or being pinched by the clamp.
(The grommet edging is not used.)
Lock nut
Conduit holder
Conduit connector
* Be sure to use the grommet edging.
Conduit holder
Power supply cable
Grommet edging *
(Accessories)
X1, X2:
Transmission
cable
Prohibited
Cable
Screw hole
En-12