Draper 14602 Petunjuk Manual - Halaman 12

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Bor Draper 14602. Draper 14602 20 halaman. 18v li-ion cordless hammer drill

BASIC CORDLESS HAMMER DRILL OPERATIONS

8.3 INSTALLING AND

REMOVING BITS – FIG. 3

The drill is fitted with a keyless chuck

that a chuck key is not required to secure the drill or

screwdriver bit.

(i) Place the drill bit shoulder into the chuck as

far as it will go.

(ii) Tighten the chuck firmly.

Note: Short screwdriver bits need only be inserted to

the depth of the hexagon shank before tightening

chuck by hand.

8.4 LED WORK LIGHT – FIG. 4

To aid drilling and screwdriving in confined,

inadequately lit spaces, the LED work light

automatically illuminates when the trigger is

activated.

8.5 FORWARD/REVERSE SELECTOR – FIG. 5

The switch determines the direction of rotation of the

chuck, i.e. clockwise or anticlockwise.

(i) Stop the drill and push switch

right.

Note: When the direction switch is pushed to

the left, the chuck will rotate clockwise.

When the switch is pushed to the right, the

chuck will rotate anticlockwise. Before

operation, check that the switch is set in the

required position. Do not change the direction

of rotation until the chuck comes to a complete

stop.

(ii) When the drill is not in use move the direction switch to the neutral position (the

middle setting) to lock the trigger out. This will help prevent accidental drill operation

and drill burn-out situations.

8.6 VARIABLE SPEED TRIGGER – FIG. 5

When the trigger

in the forward or reverse position). This trigger switch is electronic which enables the user to

vary the speed continuously. The speed varies according to how far the trigger switch is

depressed. The further it is depressed, the faster the chuck will rotate. The lighter it is

depressed, the slower it will rotate.

is depressed, the chuck will rotate (provided the direction switch is set

, this means

FIG.4

to the left or

FIG.5

FIG.3