Draper CHD182VLIA Petunjuk Manual - Halaman 16

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Bor Draper CHD182VLIA. Draper CHD182VLIA 20 halaman. 18v cordless combi-drill

BASIC OPERATION

9.5 BELT CLIP - FIG. 8

The spring steel belt clip is convenient for hanging the

drill temporarily. The clip can be installed on either side

of the tool.

To install the clip

fasten with screw

overtighten and strip the thread.

9.6

To prevent wood splitting around the drill holes on the reverse side, place a piece of scrap

timber under the material to be drilled.

9.7

Start drilling at a low speed to prevent the drill bit from wandering. Once penetration is

achieved, fully depress the trigger to achieve maximum speed and hammer power.

9.8

Metals such as sheet metal, aluminium and brass may be drilled. Mark the point to be

drilled with a centre punch to help the drill bit tip to locate.

9.9

To prevent a slip or damage to the screwhead, match the screwdriver bit to the screwhead

size. To remove screws, select correct position on collar

the reversing position and apply pressure to the screwhead and depress the trigger slowly.

, locate the clip in position and

supplied, take care to not

move the direction switch to

FIG.8