Draper STORMFORCE CDH145V2C Petunjuk Manual - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Bor Draper STORMFORCE CDH145V2C. Draper STORMFORCE CDH145V2C 20 halaman. 14.4v cordless li-ion hammer drill

Halaman Cetak

INTRODUCTION

4.1 SCOPE

This cordless drill is designed for use with a variety of drill bits, intended for drilling holes in

wood, plastic, metal, brick etc. It is intended for domestic and light commercial use only.

Any other application is considered misuse.

4.2 SPECIFICATION

Stock No.............................................................................................................................. 14599

Part No. ..................................................................................................................... CDH145V2C

Battery:

Type ........................................................................................................................ Li-ion

Rated Voltage ........................................................................................................ 14.4V

Rating ..................................................................................................................... 1.5Ah

Charger:

Rated Voltage ....................................................................................................... 230V~

Rated Frequency ..................................................................................................... 50Hz

Rated Power Input ................................................................................................... 10W

Rated D.C. Output Voltage ................................................................................ 18V DC

Rated D.C. Output Current ................................................................................. 350mA

Construction ......................................................................................................... Class II

Drill Capacities:

Wood ..................................................................................................................... 20mm

Mild Steel ................................................................................................................ 8mm

Masonry ................................................................................................................. 10mm

Maximum Torque .............................................................................................................. 18Nm

Revolutions Per Minute (no load) ............................................................................ 0-700min

Chuck Capacity ................................................................................................................. 10mm

Spindle Thread ...........................................................................................................

Sound Pressure Level .................................................................................................. 83.3dB(A)

Sound Power Level ..................................................................................................... 96.3dB(A)

Vibration Level .......................................................................................................... 14.047m/s

Weight (drill and battery) ............................................................................................... 0.77kg

4.3 HANDLING & STORAGE

Although this machine is small in size, care must still be taken when handling and lifting.

Dropping this machine will have an effect on the accuracy and may also result in personal

injury. This machine is not a toy and must be respected.

The environment will have a negative result on its operation if you are not careful. If the air

is damp, components will rust. If the machine is unprotected from dust and debris;

components will become clogged: And if not cleaned and maintained correctly or regularly

the machine will not perform at its best.

-1

⁄

x 24unf