Draper STORMFORCE CSDS20SF Panduan Pengguna - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Bor Draper STORMFORCE CSDS20SF. Draper STORMFORCE CSDS20SF 20 halaman. Sds+ rotary hammer drill
Halaman Cetak
9. BASIC OPERATION
– When the drill is not in use move the direction
switch
to the neutral position (the middle
setting) to lock the trigger out.
Note: Failure to use the neutral position may
activate the trigger inadvertently. This inadvertent
operation may cause the drill to become damaged.
9.3 VARIABLE SPEED TRIGGER – FIG.7
When the trigger
rotate (provided the direction switch
forward or reverse position). This trigger switch is
electronic which enables the user to vary the speed
continuously.
– The speed varies according to how far the trigger
switch is depressed.
– The further it is depressed, the faster the drive
spindle will rotate.
– The lighter it is depressed, the slower it will
rotate.
9.4 LED WORKLIGHT – FIG.8
To aid use in confined, and inadequately lit spaces;
the LED worklight
when the trigger is activated.
9.5 FUNCTION SELECTOR – FIG.9
Rotary/hammer selection:
– The rotary hammer selector switch
incorporates a locking button
– Press the button whilst turning the switch.
– Rotate the switch to either the rotary
and hammer settings
is depressed, the drive will
is set in the
automatically illuminates
.
.
B
FIG.7
FIG.8
or rotary
A
FIG.9
- 15 -
A
B