Draper 63130 Petunjuk Manual - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Penggiling Draper 63130. Draper 63130 12 halaman.

IMPORTANT – Make sure that the mains voltage matches

the voltage stated on the machines rating plate.

FITTING THE GUARD

Before fitting the disc to the machine, the protective guard

must be fitted and adapted to working requirements.

Fitting the guard:

– Fit the collar of guard ✭✌ on flange ✮✌, the guard can

only be fitted on, in one position. Line up the lugs, insert

and twist to your preferred position.

– Tighten screw ✯✌ make sure that the guard is securely

fixed to the flange. (Fig.2).

CAUTION

Never fix the guard with the splinter deflector facing

outwards.

FITTING THE ABRASIVE DISC

Fit flange ✲✌ and ensure it engages with the flats on the

spindle ✴✌. (Fig.2).

– Place the disc on the shaft.

– Lock the spindle with button ✱✌ on the head of the

machine. (Fig.3).

– With the spindle locked, screw the flange nut ✰✌ on to

the spindle (NOTE: Boss towards grinding disc, and away

from cutting disc) and then tighten with pin spanner

which is supplied with the machine.

REMOVING THE DISC

In order to replace the disc, carry out the above procedure

in reverse.

OPERATION & USE

Fig.2

✮✌

✯✌

✭✌

✳✌

Fig.3

- 6 -

✴✌

✲✌

✰✌

✱✌