Draper 83420 Petunjuk Manual - Halaman 12

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Penggiling Draper 83420. Draper 83420 20 halaman. 150mm 150w

PREPARING THE GRINDER

Choose a location that is level, flat and with a lot of natural light.

The bench grinder should be operated on a work bench that is high enough to prevent any

injury caused by working in an uncomfortable position; but not too high that the work piece

cannot be safely viewed from above.

WARNING! Bending over or having your neck bent for too long (from looking down) can

lead to fatigue injuries.

The environment will have a negative result on its operation if you are not careful. If the air

is damp, components will rust. If the machine is unprotected from dust and debris;

components will become clogged: And if not cleaned and maintained correctly or regularly

the machine will not perform at its best.

The work bench should offer enough space around the bench grinder for all possible

applications and to house any accessories.

Although the bench grinder has been assembled in the factory, some final assembly and

adjustments will be required before it can be used. The fine setup will come from making

small adjustments.

Securely bolt the bench grinder to a work bench or other secure surface through the various

points in the base (fixings are not supplied).

Ensure there is enough clear space around the grinder to accommodate large items which

may be ground, i.e., garden tools, etc. To reduce any vibration, mount the grinder on a

vibration absorption mat.