Draper FlexShade NEXD Petunjuk Manual - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Perabotan Dalam Ruangan Draper FlexShade NEXD. Draper FlexShade NEXD 8 halaman. Clutch-operated small and large hardware
Juga untuk Draper FlexShade NEXD: Petunjuk Pemasangan & Pengoperasian (6 halaman), Petunjuk Pemasangan & Pengoperasian (8 halaman), Petunjuk Pemasangan & Pengoperasian (8 halaman), Petunjuk Pemasangan & Pengoperasian (10 halaman), Petunjuk Manual (12 halaman)

Clutch-Operated FlexShade

Small and Large Hardware

Section 8 - Surface Headbox or Pocket Headbox

1. Snap endcap covers onto endcaps.

2. Place endcaps into back/top portion of wall/ceiling

or into pocket extrusion of pocket headbox. Using pre-drilled holes

in endcaps, mark the headbox for drilling.

3. Drill holes in back or top, depending on whether you will be mounting

the headbox to the wall or ceiling, or in a pocket.above

4. Attach endcaps and Surface Headbox back/top or Pocket Headbox

extrusion to wall, ceiling or pocket using mounting hardware

appropriate for site conditions.

Please Note: Small size pocket style headbox requires securing closure

panel to endcap with provided screw.

5. Install shade

(See Page 3)

6. Attach ceiling/wall

headbox fascia, or pocket closure

(surface)

Note on surface style headbox: Fascia is not fully seated until it clicks

into place on both ends. Once in place, check for secure fit. If not

secure, secure with appropriate fastener

NEXD,

headbox

(surface)

(Fig. 13)

(not included)

Small Pocket Headbox

STEP 1

STEP 2

STEP 3

Secure to Endcap

with screw.

Figure 13

page 7 of 8

Large Pocket Headbox

STEP 1

STEP 2

STEP 3