Draper Motorized FlexShade Petunjuk Manual - Halaman 6

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Perabotan Dalam Ruangan Draper Motorized FlexShade. Draper Motorized FlexShade 12 halaman. Motor operated window shades with several control options
Juga untuk Draper Motorized FlexShade: Petunjuk Pemasangan & Pengoperasian (8 halaman)

Halaman Cetak
Motorized FlexShade

Section 5 - Mounting Roller Assemblies, Couplers, and Endcaps

Please Note: If unit is to be installed with Surface
or Pocket Headbox, please consult previous
sections before proceeding.
1.
SHAFT
FULLY
RETRACTED
3.
Please Note:
Use measurements instead
of the roller to determine
placement.
Caution: Ensure the operator-end fabric/roller
assembly's coupler shaft is fully extended
"Operating the Retractable Shaft.")
®
(Coupled)
Caution: Before mounting shades, verify measurements on
the card provided with the shade, and ensure the endcaps
are installed at the correct width.
Attach motor endcap to surface
using appropriate fasteners.
Caution: Ensure the operator-end fabric/roller
assembly's coupler shaft is fully retracted
(see "Operating the Retractable Shaft.")
Verify coupler
location, and
mark for
placement.
4.
(see
.
.
A
SHAFT
FULLY
EXTENDED
Slide the coupler onto the
coupler shaft of the first fabric/
roller assembly to be installed,
and hold in place.
(Endcap
option shown.)
page 6 of 12
2.
Attach motor end roller to endcap or
bracket and hold in place.
(Endcap option shown.)
Slide motor
clips into place.
B
5.
Attach coupler to
surface, using
appropriate fasteners.
(Endcap option shown.)