Draper 16061 Petunjuk Untuk - Halaman 12

Jelajahi secara online atau unduh pdf Petunjuk Untuk untuk Sander Draper 16061. Draper 16061 16 halaman. 400w 230v oscillating multi-tool kit
Juga untuk Draper 16061: Petunjuk Manual (20 halaman)

Halaman Cetak

10. MAINTENANCE

10.1 MAINTENANCE

Regular inspection and cleaning reduces the necessity for maintenance operations and will

keep your tool in good working condition. The motor must be correctly ventilated during

tool operation. For this reason avoid blocking the air inlets. If replacement of the supply cord

is necessary this has to be done by the manufacturer or his agent in order to avoid a safety

hazard. Remove the plug from the socket before carrying out adjustment, servicing or

maintenance.

11. TROUBLESHOOTING

11.1 TROUBLESHOOTING

Problem

Motor does not start

Machine vibrates

12. DISPOSAL

12.1 DISPOSAL

- At the end of the machine's working life, or when it can no longer be repaired, ensure

that it is disposed of according to national regulations.

- Contact your local authority for details of collection schemes in your area.

In all circumstances:

• Do not dispose of power tools with domestic waste.

• Do not incinerate.

• Do not abandon in the environment.

• Do not dispose of WEEE*

as unsorted municipal waste.

* Waste Electrical & Electronic Equipment.

Cause

1. Fuse.

2. Brushes worn.

3. Other.

1. Pad/bonnet damaged

or out of balance.

Remedy

1. 13amp time delay fuse

or circuit breaker.

2. Replace brushes.

3. Authorised service agent.

1. Replace pad/bonnet.