Draper 300W Petunjuk Untuk - Halaman 5
Jelajahi secara online atau unduh pdf Petunjuk Untuk untuk Sander Draper 300W. Draper 300W 16 halaman.
Halaman Cetak
4.
INTRODUCTION
4.1 SCOPE
This machine is intended for sanding of wood and similar materials only. It is intended for
domestic and light commercial use only. Any other application is considered misuse.
4.2 SPECIFICATION
Stock no ........................................................................................................................... 83643
Part no .......................................................................................................................... PT300SF
Motor:
Rated voltage ...................................................................................................... 230V~
Rated frequency ................................................................................................... 50Hz
Rated input ......................................................................................................... 300W
Revolutions per minute (no load) ............................................................. 12,000min
Pad size ............................................................................................................... 230 x 115mm
Sheet size ............................................................................................................ 280 x 115mm
Orbital diameter ............................................................................................................ 2.0mm
Sound pressure level .................................................................................................... 69dB(A)
Sound power level ..................................................................................................... 80dB(A)
Vibration level ............................................................................................................. 4.65m/s
Weight ............................................................................................................................. 2.5kg
4.3 HANDLING & STORAGE
The environment will have a negative result on its operation if you are not careful. If the air
is damp, components will rust. If the machine is unprotected from dust and debris;
components will become clogged: And if not cleaned and maintained correctly or regularly
the machine will not perform at its best.
-1
2
5