Draper 57941 Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Sander Draper 57941. Draper 57941 16 halaman. 230v 1/2 sheet sander

Halaman Cetak

BASIC SANDER OPERATIONS

Note: Remove the plug from the socket before

carrying out adjustment, servicing or maintenance.

8.3

HOOK AND LOOP ABRASIVE

SHEET INSTALLATION /

REPLACEMENT – FIG. 2

The sanding sheets are simply pressed onto the

base pad. The holes in the sander must correspond

to the holes in the sanding sheet for maximum dust

extraction.

8.4 ABRASIVE PAPER

Only use good quality abrasive paper as this will

improve the sanding efficiency and reduce working

time. Use coarse grade (40, 60, or 80) sanding

sheets when large quantities of material need to be

removed. For finishing operations use 120 grade

sanding sheets.

Note: Abrasive sheets and the sander base pad are

consumable items.

8.5 DUST

Inhalation of dust particles can be detrimental to

health. The dust outlet can be connected to a dust

extraction machine.

The dust extraction box can be used instead when

connection to a dust extractor is not practical to

reduce amount of air borne dust.

The dust box is attached by simply pushing it onto

the outlet port until the sides of the box meet the

body of the sander.

REMOVING AND EMPTYING THE DUST

COLLECTION BOX

Disconnect the plug from the electricity supply.

Hold your sander vertically with the dust collector at

the bottom.

Pull the box gently holding the grips on the side of

the dust collection box.

Empty the dust box and shake out the filter bag, then

replace on the sander.

A click is heard when the dust box is correctly fitted.

Do not wash the dust box/filter.

Empty the dust collection box/filter at regular

intervals.

FIG.4

FIG.5

FIG.6

- 12 -