DRAPER TOOLS Bunker 08221 Manual Petunjuk Perakitan

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Penyimpanan Alat DRAPER TOOLS Bunker 08221. DRAPER TOOLS Bunker 08221 6 halaman. 41” workbench roller tool cabinet, 7 drawer

Halaman Cetak

To make assembly easier we recommend having

two persons aid one another in assembly.

STEP 1: ATTACH CABINET HANDLE

• Position the cabinet handle over the holes on the cabinet.

• Attach with (4) M6 x 16mm bolts and tighten with

supplied hex key.

(L)

drapertools.com

Draper Tools Limited, Hursley Road, Chandler's Ford, Eastleigh, Hampshire. SO53 1YF UK

STEP 2: ATTACH CASTOR

• Be sure the drawers are locked and place the cabinet

upside down.

• Secure castors to the unit using the (4) M8 x 25mm bolts

and tighten with supplied hex key.

• Repeat this process on the opposite side of the cabinet.

REMOVING AND REPLACING

THE DRAWERS

• Pull the drawer completely out.

• Press down the left tab and lift up the right tab.

• Pull drawer off slides.

• To reinstall the drawer, realign with the internal drawer

slide and push in until locked in place.

CASTOR MAINTENANCE

(R)

• Grease the castors annually using high-quality bearing grease.

CARE AND CLEANING

• Periodically the surfaces should be cleaned with a mild detergent

and water. Grease and oil can be removed with most standard

cleaning fluids. For safety, use a non-flammable cleaning fluid.

• Auto wax will preserves the storage unit's luster finish and

protects against scratches.

41" Workbench Roller

Tool Cabinet, 7 Drawer

08222, 08216, 08221

Stock No.