BCS BCS-580CA Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Keamanan BCS BCS-580CA. BCS BCS-580CA 10 halaman. Super high resolution colour camera

Halaman Cetak
BACKLIGHT MODE SET
BACKLIGHT MODE
SENS
GAIN <xO-x4>
040
EXIT:PRESS MENU KEY
AE MODE MUST BE AE
Set SENS OFF, the shutter work first, means the electronic shutter
will adjust automatically, and gain only works when the shutter
enhanced to 1/50s, (the period of gain is between 0-30dB), Set ON,
the gain work first, means the gain will adjust automatically(period
is between 000-255, default value is 40), and the electronic shutter
will be 1/50s.
AREA MODE, total is 5 reference areas:
AREA5
AREAl AREA4
AREA3
AREA2
BACKLIGHT MODE SET
BACKLIGHT MODE
AREAl
UNWEIGHTED LEVEL
000
EXIT:PRESS MENU KEY
AE MODE MUST BE AE
-9-
CENTER, LOWER 113,CENTER LEFT, CENTER RIGHT, UPPER 1/3. If
choose the CENTER as the reference area, means the average
light in the AREA 1 will be the standard. Setup way: set the
CENTER ON, then set the dynamic period of the other four areas
on UNWEIGHTED LEVEL, the dynamic range is between 000-015,
000 is minimum, 015 is the maximal (50dB)

DAY AND NIGHT..

J
Enter the DAYAND NIGHT mode set(Only the IR Cut filter removal
Day/Night Camera)
DAY AND NIGHT
DAY AND NIGHT
DAY TO NIGHT VALUE
NIGHT TO DAY VALUE
EXIT:PRESS MENU KEY
IDAY AND NIGHT MODE SET
DAY AND NIGHT MODE SET:
trigger Mode optional. For external-trigger details
refer to page 4-5.
Auto Mode:
Day to Night: switch to Night mode while gain higher
than the set value(day to night value can be set
from195 to 230 based on requirements).212by
default.
AUTO
212
170
AutolDay/Night/external
-10-