Drawell DW-LBI- 80 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Drawell DW-LBI- 80. Drawell DW-LBI- 80 9 halaman. Biochemical incubator

Halaman Cetak

and the heating is operated by the position control.When self-tuning finished, the

instrument returns to the normal control state. If enters the setting state in the self-tuning

process, it will exit from the self-tuning program.

3)In the running or stop state, shortly press the "OK"key to enter the temperature setting

state, the upper row displays "SP", the lower row displays the setting temperature, then

press the "OK"key again, the upper row displays the "ST" and the lower row displays the

setting time.

4)Long press "OK"key for 5 seconds to enter the setting state of other parameters. The

upper row will display the prompt and the lower row will display the parameter values

(see the attached table for details of each parameter). After setting the parameter, long

press "OK"key for 5 seconds to exit the setting state. In each setting state, you can

quickly modify each parameter by pressing the  key,  key and the  key. After

modification, must press "OK" key to confirm, otherwise it is invalid.

Parameter specifications:

Symbol

Long press the OK key

Lck

Lck is××××（the password can be obtained from the manufacturer）

COOL

Drawell International Technology Limited

Web : www.drawell.com.cn

Value

SPL～SPH

0～9999 min

0～9999

-20.0～+20.0

0.1～20.0

1～400

0～100

60～600

SPL~50.0

1.0～5.0

1～60 min

Tel: +86-023-63268643

Description

Temp. setting value

Time setting value

LOCK

Correction for measured

value

Output proportional

Integral Time

Derivative time

Compressor start delay

Upper temperature limit for

compressor normally open

Upper deviation alarm

Print interval

Email : [email protected]

Factory set

value

random

——

0℃

——