Bosch WLM24441BY Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin cuci Bosch WLM24441BY. Bosch WLM24441BY 10 halaman.

Halaman Cetak

What to do if ...

Water is leaking out.
No water supply.
Detergent not dispensed.
Washing machine door cannot be
opened.
Programme does not start.
Detergent solution is not drained. – Clean the drain pump.
Water not visible in the drum.
Spin result not satisfactory.
Spin cycle performed several
times.
Compartment
not rinsed out
completely.
Odour formation in the washing
machine.
Foam escapes from the detergent
drawer.
Excessive noise, vibrations and
"wandering" during spin cycle.
Display panel/indicator lamps do
not light up while the appliance is
running.
Programme sequence longer than
usual.
Detergent residues on the laundry. – Occasionally, phosphate-free detergents contain water-
If you cannot correct a fault yourself or a repair is required:
– Turn the programme selector to
– Turn off the tap and call the customer services.
Downloaded From WashingMachine-Manual.com Manuals
– Fit/refit drainage hose correctly.
– Tighten the screw connection of the supply hose.
– Start/Pause
not selected?
– Water tap not turned on?
– Supply hose filter blocked? Clean the filter.
– Supply hose kinked or trapped?
– Safety function active. Programme stopped?
–
(Rinse stop = no final spin) selected?
– Can be opened by emergency release only.
– Start/Pause
or
Finish-in time selected?
– Washing machine door closed?
page 11
– Clean waste pipe and/or drainage hose.
– Not a fault - water below the visible area.
– Wash small and large items of laundry together.
–
Easy iron selected?
page 6
– Speed selected too low?
page 6
– Not a fault - unbalanced load detection system adjusts
the imbalance.
– Remove the insert. Clean detergent drawer and insert.
page 10
– Run the Cottons
90 °C programme without
laundry.
– Use standard detergent.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water
and pour into compartment II in the detergent drawer.
– Reduce detergent dosage for the next wash cycle.
– Are the appliance feet fixed?
Secure the appliance feet.
Installation instructions,
page 5
– Transport bolts removed?
Remove transport bolts.
Installation instructions, page 3
– Power failure/off? Interrupted programme will be
resumed when power returns.
– Circuit breaker tripped? Reset the circuit breaker/
change the fuse.
– If the fault occurs repeatedly, call the customer service.
– Not a fault - unbalanced load detection system adjusts
imbalance by repeatedly distributing the laundry.
– Not a fault - foam detection system active - adds an
additional rinse cycle.
insoluble residues.
– Select Rinse
or brush the laundry after washing.
Off and pull the mains plug out of the socket.
page 13

Emergency release

page 11
page 4
page 6
page13

Customer service

If you cannot rectify the fault yourself
sales service. We will always find a suitable solution and will avoid a visit from a service
technician wherever possible.
The contact details for all countries can be found in the enclosed after-sales service directory.
Please give the customer service the product number (E-Nr.) and the production number
(FD) of the appliance.
Product number
Rely on the professionalism of the manufacturer. Please contact us.
This will ensure that the repair is carried out by trained service technicians who arrive
equipped with genuine spare parts for your appliance.
12
e.g. in the event of power failure
Interrupted programme will be resumed when power returns.
However, if the laundry has to be removed, the washing
machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot.
If possible, leave it to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen
through the glass.
– Set the programme selector to Off and disconnect the mains plug.
– Drain the detergent solution.
page 11
– Pull the emergency release with a tool and release. The washing
machine door can then be opened.
page 12: What to do if ..., please contact our after-
You will find the identification plate containing
this information on the frame of the open door ,
and of the rating plate on the back of the
appliance.
Production number
13