Drawmer 1973 Panduan Operator - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Perekaman Drawmer 1973. Drawmer 1973 12 halaman. Three-band stereo fet compressor

Halaman Cetak

The following diagram provides a good, but general, idea of some useful frequencies that will aid in setting the

crossover frequencies:

LOW BAND, MID BAND, HIGH BAND

Threshold:

Determines the level below which compression starts to take

place. The 1973 incorporates a Soft Knee, more compression is

applied automatically as the input signal level increases, negating

the need for a Ratio control.

Attack:

Controls the speed that the compressor responds to signals that

exceed the level set by threshold. Six switchable Attack settings.

All times are nominal, the actual attack time is further modified

by the release setting chosen.

Release:

Sets the time taken for the signal to return to normal after the input level has fallen below threshold.

The first three switch positions are fixed and provide progressively increasing release times, while positions F(ast),

M(id) and S(low) cause the release times to vary in a manner which automatically adapts to the dynamics of the

incoming signal.

Attack Presets

Gain:

During compression the signal is attenuated, gain may be required to produce the required output level. In addition,

as the 1973 is multi-band, the three gain controls are used to adjust the levels of each band to obtain a desirable

overall signal, or to bring out the bass, treble etc.

Gain Reduction Meter:

Use the meter as a guide to how much gain to re-apply using the Gain control

infinity - -32dB

see below diagram

-10 - +20dB

-1,-2,-3,-5,-7,-10,-15,-20dB

DRAWMER 1973 O

all bands

PERATOR'S

ANUAL

Release Presets