Drawmer dl441 Panduan Operator - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Operator untuk Peralatan Perekaman Drawmer dl441. Drawmer dl441 12 halaman. Quad compressor limiter
Juga untuk Drawmer dl441: Panduan Operator (12 halaman)

Halaman Cetak
4
1:
Disconnect the unit from the mains.
2:
Using a number 1 size pozidrive screwdriver, remove the two
self-tapping screws holding the voltage selection switch cover plate on
the rear panel.
3:
Remove the cover plate and slide the switch fully to its opposite end.
4:
Rotate the cover plate one half turn, (180 ) and refit the two screws.
5:
Replace with a correctly rated fuse for the selected operation voltage.
6:
Re-connect to mains power source.
DL441 OPERATORS' MANUAL