BD 445870 Panduan Referensi Cepat - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Peralatan Laboratorium BD 445870. BD 445870 10 halaman.
Halaman Cetak
To remove positive tubes:
1
Open the desired drawer. Select the remove positive tubes soft key (left).
2
All the positive stations illuminate with FLASHING GREEN, FLASHING RED indicators. Remove one of the positive
tubes and scan its barcode label. The LEDs at this station extinguish. Repeat to remove additional positive tubes.
To remove negative tubes:
1
Open the desired drawer. Select the remove negative tubes soft key (left).
2
All the final negative stations illuminate with FLASHING GREEN indicators.
3
To remove all negative tubes (batch removal), select the remove negatives – batch soft key (left). Remove all the
tubes in the indicated stations. The barcode scanner turns off, so you cannot scan any of the tube barcode labels. Do
not close the drawer until you have removed all the tubes in the FLASHING GREEN stations. When all negative tubes
are removed, select the OK soft key.
To remove negative tubes one at a time, remove the desired tubes and scan their barcode labels. Continue to remove
and scan all the desired individual negative tubes.
To remove completed AST sets:
1
Open the desired drawer. Select the remove completed AST sets soft key.
2
The first completed AST set stations illuminate with FLASHING GREEN indicators. Remove the carrier and scan its
barcode label. The LEDs at this station extinguish. Repeat to remove additional AST sets.
MA0120(11) (2022-04) • English
Removing Tubes
7
Removing +/–/AST Tubes