Drawmer CMC7 Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Pengontrol Drawmer CMC7. Drawmer CMC7 12 halaman. Surround monitor controller

DRAWMER

INSTALLATION

The CMC7 is a free standing, desktop unit. We have endeavoured to make the

CMC7 as small as possible without compromising on controls, connections and

above all sound quality. The unit has a footprint of just 18.7cm x 16.4cm with

controls on the top, with headphone, input and output connections on the rear.

The CMC7 unit will be supplied with an external switching mode power supply that

is capable of 100-240Vac continuous (90-264Vac max) and so should work globally.

We strongly advise that the power supply that has been supplied with the CMC7 is

used, rather than one with the equivalent ratings. In addition, should the power

supply fail for any reason we strongly advise that you contact Drawmer for a

replacement rather than repairing the unit yourselves. Failure to do either of these

could permanently damage the CMC7 and will also invalidate the warranty.

The power supply can be fitted with 4 interchangeable AC pins for the UK, European,

USA and Australian, though will be supplied with a type that is suitable for domestic

power supply outlets in your country, the others are available upon request. For your

own safety, it is important that you use the correct adapter. The power supply must

not be tampered with or modified.

Before connecting the CMC7 to the power supply ensure that all knobs are

turned off (i.e. fully anticlockwise). A switch next to the d.c. power inlet on the rear

of the unit switches the power on/off.

POWER SWITCH

POWER SUPPLY INLET

To help protect the CMC7 from theft the side has a Kensington Security Slot (also

called a K-Slot) which enables the fitting of hardware locking accessories that can

attach your CMC7 to an immovable object, making the CMC7 more of a challenge for

the potential thieves to steal.