BD Alaris 8000 Buletin Layanan - Halaman 12

Jelajahi secara online atau unduh pdf Buletin Layanan untuk Unit Kontrol BD Alaris 8000. BD Alaris 8000 14 halaman. Inspecting the pump module bezel

5. Reinstall the logic board. Refer to the technical service manual for reassembly

instructions.

6. Lifting the motor control board:

a. Remove the motor control board screw.

b. Using the diagonal cutters, lift and remove the snap rivet from the motor control

board. Be careful not to cut the snap rivet while removing it.

7. Lift the motor control board and inspect for damaged or separated bezel posts.

If there are damaged or separated bezel posts, the bezel must be replaced. If there are

no damaged or separated bezel posts, continue to Step 8.

8. Reinstall the motor control board. Refer to the technical service manual for reassembly

instructions. Continue to Reassembling and Testing the Alaris™ Pump Module on

page 13.

PN P00000360

Record number 1103-001-008-R-SD-INF, DIR 10000307230, Version 01 Release Date: 16AUG17

DOCO Use Only (Approver's List): 0207-001-001-S (Latest Version) to determine authorized approvers

DOCO Use Only (Record Format Template) 0204-011-005-R, DIR 10000153640, Ver 02, Release Date: 04APR16

Inspecting the Alaris™ Pump Module Bezel

DIR No.: 10000351665 Version: 00

Bezel posts

Page 12 of 14