Bosch 46 HBN 44 Panduan Penggunaan dan Perawatan - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Oven Bosch 46 HBN 44. Bosch 46 HBN 44 48 halaman. Electric built-in single & double oven
Juga untuk Bosch 46 HBN 44: Panduan Penggunaan dan Perawatan (48 halaman), Panduan Petunjuk Instalasi (28 halaman), Panduan Petunjuk Instalasi (28 halaman)
Halaman Cetak
Care & Cleaning
The Bosch
line of ovens
feature
a pyrolytic
self-
cleaning
function
that eliminates
the difficult
and
time consuming
manual
scrubbing
of the oven in-
terior.
During
self-cleaning
the oven
uses
very
high
temperature
(approx.
850°F)
to burn
away
soil and grease.
The fumes produced
during
this
function
of the oven
are then
filtered
and ex-
pelled.
You will note however
that a powder
ash
residue
will be left on the bottom
of the oven after
completion
of self cleaning.
Once
the oven
has
cooled
sufficiently
the residue
may be removed
using
a damp cloth or sponge.
See the following
instruction
on use of the self clean function.
Make sure all controls
are Off and the oven is
cool betk_re cleaning.
Failure
to do so can re-
sult in burns or electrical
shock.
For parts
of the oven
other than the oven cavity
the
following
cleaning
methods
are
recom-
mended:
* Control
Panel
Use warm soapy water or spray glass cleaner
to
clean
the control
panel.
With
a soft cloth
or
sponge
wash,
rinse
and dry the control
panel
thoroughly.
DO NOT use abrasive
cleaners
or
steel wool pads. These will damage
the surface.
• Stainless
Steel
To clean,
use a standard
cleaner
designed
for
stainless
steel
such as: Cameo(R_', Bar Keepers
Friend(R) or Bon-Ami,_R). Follow
manufacture
in-
structions.
When
clean,
a polish
such as Twin-
kle(R_'or Stainless
Steel Magic(R_' can be applied.
DO
NOT
USE
ABRASIVE
MATERIALS
SUCH
AS
STEEL
WOOL
OR
ROUGH
SPONGES.
IT WILL
SCRATCH
THE
SUR-
FACE.
• Front of Oven Door(s)
and Handle(s)
Use warm soapy water or spray glass cleaner
to
clean
the glass door surface.
With a soft cloth
or sponge
wash, rinse and dry the door front(s)
and handle(s)
thoroughly.
DO NOT
use abra-
sive
cleaners
or steel
wool
pads.
These
will
damage
the surface.
• Broiler
Pan and Rack(s)
Use warm
soapy water.
With a steel wool pad
wash,
rinse and thoroughly
dry the pan and/or
rack(s).
DO NOT
clean
the broiler
pans
or
racks
by leaving
them in the oven
when
run-
ning the Self Clean function.
Frame Outside
Door Gasket Area
Make
sure oven
is cool, then use warm
soapy
water.
With
a non-abrasive,
plastic
scrubbing
pad clean
the frame
surface
outside
the door
gasket
area. This area must be cleaned
by hand
because
the area outside
the gasket does not get
hot enough
to burn offthe
soil (see Figure
12).
DO NOT
Hand clean gasket
Hand clean frame
area outside gasket
-" 0
::_:
_ 0
0
o
Figure
12.
• Door Outside
gasket Area
Make
sure oven
is cool, then use warm
soapy
water.
With
a non-abrasive,
plastic
scrubbing
pad clean the area outside
the door gasket area.
This area must be cleaned
by hand because
the
area outside
the gasket does not get hot enough
to burn offthe
soil (see Figure
12).
Using
the Self Clean
Function
The Self Clean
function
is a timed
function
and
theretk_re is used just as if using
the oven in Im-
mediate
Start/Automatic
Shut-Off
or Delayed
Start/Automatic
Shut-Off.
There
are
a
few
preparations
that must be made
however
as well
as some post function
clean-up
that you will find
described
below:
1.
Before
using
Self Clean
be sure to remove
the racks.
Also,
if you have placed
any alu-
minum foil in the oven this should also be re-
moved.
Note:
If items
are left in the oven
during
self
cleaning
they may become
damaged
and
racks
will become
discolored.
Also,
the
racks will become
difficult
to slide in and
out.
2.
Clean
soil from
the frame
around
the door,
outside
the door gasket
(see Figure
12). Do
not clean
the door
gasket
by hand
as this
15